Corning ® 15 mL and 50 mL Centrifuge Tubes
4Pages

Ordering Information Corning® 15 mL Centrifuge Tubes Cat. No. Plug seal Plug seal Plug seal Plug seal CentriStar™ CentriStar Conical bottom Conical bottom Conical bottom Conical bottom Conical bottom Conical bottom Corning® 15 mL and 50 mL Centrifuge Tubes Corning 50 mL Centrifuge Tubes Cat. No. 430290 PP Plug seal 15,500 430291 PP Plug seal 15,500 430304 PET Plug seal 3,600 430828 PP CentriStar 17,000 430829 PP CentriStar 17,000 4558 PP CentriStar 17,000 431526 PP Plug seal 15,500 431527 PP Plug seal 15,500 431528 PP Plug seal 15,500 431525 PP Plug seal 15,500 430897 PP Plug seal 3,000 430921 PP CentriStar 3,000 Conical bottom Conical bottom Conical bottom Conical bottom Conical bottom Conical bottom Easy ID color strip – green, conical bottom Easy ID color strip – orange, conical bottom Easy ID color strip – blue, conical bottom Hazard labeling, conical bottom Self-standing bottom Self-standing bottom Thank you for choosing Corning® disposable plastic centrifuge tubes for your research needs. This document contains product specifications, application guidelines, scientific support, and re-ordering information for 15 mL and 50 mL tubes. Product Specifications w Rating Materials: Corning centrifuge tubes are available in two standard materials: poly­ ropy­ p lene (PP) and polyethylene ­ erephthalate (PET). Polypropylene tubes provide excellent t chemical resistance and mechanical strength. They are strong, moderately rigid, and well-suited for most dis­ osable centrifuge applications. PET tubes offer excellent optical p clarity for ease of measurement, observation, and test recording. For a listing of trademarks, visit www.corning.com/clstrademarks. All other trademarks are the property of their respective owners. Corning Incorporated Life Sciences 836 North St. Building 300, Suite 3401 Tewksbury, MA 01876 t 800.492.1110, 978.442.2200 f 978.442.2476 www.corning.com/lifesciences © 2007-2016 Corning Incorporated. All rights reserved. Printed in USA 7/16 CI-GLAB-003 REV11 Warranty/Disclaimer: Unless otherwise specified, all products are for research use only. Not intended for use in diagnostic or therapeutic procedures. Corning Life Sciences makes no claims regarding the performance of these products for clinical or diagnostic applications. Scientific Support For additional product or technical information, please e-mail us at ScientificSupport@corning.com, visit www.corning.com/lifesciences, or call 800.492.1110. Outside the United States, call 1.978.442.2200. Caps: These tubes are available with two styles of polyethylene screw-top caps: the advanced Corning CentriStar™ cap and the original plug seal cap. The CentriStar cap has an easy-on/easy-off flat top and offers advanced ergo­ omics with its wider knurls and n roll-over edge design for easier gripping. This leakproof design comes with a revolutionary plug ­ eature that prevents seepage when used under recommended conditions. The f plug seal cap is an original Corning design featuring a contoured plug for a tight, secure seal. This Corning plug seal product design has successfully passed the 95 kPa (14 psi) pressure test as referenced in IATA Dangerous G

Dimensions of Corning® Centrifuge Tubes and Caps Characteristics of Corning® Centrifuge Tubes The following information is provided to serve as a general guideline for determining suitability of Corning centrifuge tubes for your applications. In addition, Corning recommends following the procedures outlined by the centrifuge manufacturer, as well as conducting a trial run to determine proper conditions before beginning any critical applications. Corning centrifuge tubes are tested for leakage. They should not break or leak if used in a properly balanced rotor with suitable carriers,...

Dimensions of Corning® Centrifuge Tubes and Caps Characteristics of Corning® Centrifuge Tubes The following information is provided to serve as a general guideline for determining suitability of Corning centrifuge tubes for your applications. In addition, Corning recommends following the procedures outlined by the centrifuge manufacturer, as well as conducting a trial run to determine proper conditions before beginning any critical applications. Corning centrifuge tubes are tested for leakage. They should not break or leak if used in a properly balanced rotor with suitable carriers,...

Ordering Information Corning® 15 mL Centrifuge Tubes Cat. No. Plug seal Plug seal Plug seal Plug seal CentriStar™ CentriStar Conical bottom Conical bottom Conical bottom Conical bottom Conical bottom Conical bottom Corning® 15 mL and 50 mL Centrifuge Tubes Corning 50 mL Centrifuge Tubes Cat. No. 430290 PP Plug seal 15,500 430291 PP Plug seal 15,500 430304 PET Plug seal 3,600 430828 PP CentriStar 17,000 430829 PP CentriStar 17,000 4558 PP CentriStar 17,000 431526 PP Plug seal 15,500 431527 PP Plug seal 15,500 431528 PP Plug seal 15,500 431525 PP Plug seal 15,500 430897 PP Plug seal 3,000...