Water Supply for Brakes
This section outlines the technical specifications for the water supply system used in brakes. It emphasizes that lower water pressure results in reduced water flow, and advises consulting the Technical Office for guidance. The technical data includes details on connection type, inlet water pressure, temperature, and minimum pipe bore size for various models (e.g., 110 W-R, 210 W-R, etc.). All models operate with a maximum inlet pressure of 4.5 bar and a temperature range of 20-40°C.

Parallel and Serial Connections
The document provides specifications for both parallel and serial connections, detailing the sizes and types of connections (e.g., 1/4” gas, 1/2” gas) for different models. It advises using flexible hoses to accommodate the movement of water jackets.

Water Supply for Clutches
Similar to the brake system, this section provides technical data for the water supply system used in clutches. The maximum inlet pressure is 3 bar, with similar temperature specifications as the brake system. Connection sizes are specified for each model.

Air Supply for Brakes and Clutches
This section includes technical data and dimensions for the air supply systems. It specifies the quantity, air inlet size, and hose configuration for various models. The document also includes a questionnaire to gather information about machine type, material specifications, roll dimensions, speed, tension, and air pressure requirements.

Additional Information
The document concludes with a request for catalogues and a list of global agents and distributors. It provides contact information for COREMO OCMEA s.r.l., the company responsible for the products.