Overview: The document outlines the technical specifications and guidelines for COREMO OCMEA's BI-M-VS series air tube design clutches and brakes. It covers product selection, usage, technical data, and safety precautions.

Correct Use of the Product: Emphasizes adherence to safety regulations and proper usage to ensure longevity and safety. Highlights the importance of following mounting and maintenance instructions to prevent accidents and reduce downtime. Notes that initial torque may be lower than nominal values until friction materials settle.

Selection: Stresses the importance of selecting the correct clutches and brakes with an appropriate service factor, especially for holding duties, where it should not be less than 2. Offers technical department assistance for application selection.

Technical Specifications: Provides detailed data for various models, including dynamic torque, maximum inertia, and air volume. Includes tables with specific measurements and performance metrics for different sizes.

Safety and Maintenance: Advises operators to use protective gear during installation and maintenance. Discusses the need for protection of rotating parts per European directives and handling of spring-applied failsafe brakes and asbestos-free friction materials.

Storage and Disposal: Offers guidelines for safe storage and handling, emphasizing protective clothing to prevent accidents. Disposal of worn materials must comply with local regulations, as they are non-toxic.

Additional Notes: Includes a disclaimer that technical characteristics, sizes, and weights are subject to change without notice. Illustrations are not binding.

Technical Specifications: Details specifications for various models, including dynamic torque, maximum air volume, and operational speed. Notes initial torque reduction in new units until friction surfaces are worn in.

Dimensions: Provides dimensions for different models, emphasizing maintaining correct clearances to prevent drag torque and overheating.

Technical Data: Includes dynamic torque values at 6 bar pressure, maximum air volume, and speed ranges. Advises regular checks for oil or grease leaks and lining wear every six months.

Usage Recommendations: Recommends ensuring adequate air supply, calculating air volume requirements, and maintaining minimum release pressure for spring-set brakes. Provides a formula for calculating air consumption.

Maintenance Guidelines: Advises regular maintenance checks to prevent lubricant leaks, monitor lining wear, and ensure correct axial movement of friction discs. Warns against temperatures exceeding 100°C to prevent rapid aging or charring of air tubes.

Distribution Network: Lists countries with agents and distributors, including Argentina, Australia, Austria, Belgium, Brazil, Canada, China, and others.

Contact Information: Provides contact details for Coremo Ocmea SPA, including address, phone, fax, and email for further inquiries.