Correct Use of the Product
The document provides guidelines for the correct use of COREMO OCMEA Radial Units, ensuring compliance with EEC rules no. 85/374 for safety. It emphasizes operating within specified conditions and technical specifications, advising against exceeding maximum data limits.

Application Selection
When selecting a unit, it is important to consider an appropriate service factor, particularly for holding duties, where it should be no less than 2. The Technical Department offers guidance on correct application and use.

Use and Maintenance
Adhering to the Mounting and Maintenance Instructions is crucial to prevent accidents and minimize downtime. Initial torque on new units may be 30% to 50% less than the catalogue value until the friction surface and drum are worn in.

Precautions for Mounting and Maintenance
Operators should wear protective clothing, such as gloves and safety glasses. Moving parts must be protected in accordance with European EEC directives.

Friction Parts
The units feature non-asbestos friction material, compliant with Health and Safety regulations. It is advised to avoid inhaling dust from brake linings and to wash hands before eating or drinking.

Storage and Disposal
Proper storage and handling are necessary to prevent accidents. Worn linings and materials are classified as non-toxic and should be disposed of according to local laws.

Technical Data
The effective dynamic torque is influenced by air pressure and speed. Calculations for units used as brakes or clutches are provided, considering minimum pressure and compensating pressure for centrifugal force.

Selection Calculations
For single or cyclic starts/stops, calculations ensure that the torque and heat produced do not exceed the unit's thermal capacity.

Dimensions and Specifications
Detailed dimensions and specifications for single and dual flange units are provided, including torque, pressure, speed, and other critical parameters.

Product Specifications
The document lists various gas product sizes with corresponding product numbers and dimensions. For example, GR 1/4” gas has a product number H0024 and dimensions including a diameter of 6 and a length of 35.

Technical Data
The technical data section provides measurements and specifications for different components labeled A, B, C, D, E, F, G, H, and I.

Mounting Examples
Examples of mounting configurations are provided, including brakes with drum and hub, brakes with solid drum, shaft-to-shaft mounting clutch, and sheave mounting clutch. Each configuration includes air inlet specifications.

Global Sales Organization
The document lists countries where the company has sales coverage, including Australia, Austria, Belgium, Brazil, China, Korea, Denmark, Finland, France, Germany, Japan, Greece, Hong Kong, United Kingdom, Israel, Norway, Holland, Spain, South Africa, Sweden, Switzerland, Turkey, and the USA.

Contact Information
The head office is located in Assago, Italy, with contact details including telephone, fax, internet, and email provided for further inquiries.