1. Catalogs
  2. CORDENKA GmbH & Co. KG
  3. Technical product information Sodium sulfate, anhydrous

Technical product information Sodium sulfate, anhydrous

Technical product information  Sodium sulfate, anhydrous

Technical product information Sodium sulfate, anhydrous

Product catalog summary
1. Identification of the Substance and Company
  • Chemical Designation: Sodium sulfate, anhydrous
  • Use: Industrial applications
  • Supplier: Cordenka GmbH & Co. KG, Obernburg, Germany
  • Emergency Contact: +49 6022 81 3262 (Weekdays: 08.00 h – 16.00 h)
2. Hazard Identification
  • Sodium sulfate is not classified as dangerous under EU regulations.
  • No labeling required according to EC directives.
3. Composition/Information on Ingredients
  • Chemical Formula: Na2SO4
  • Purity: 99.9%
  • CAS Number: 7757-82-6
4. First Aid Measures
  • Inhalation: Move to fresh air.
  • Skin Contact: Wash with water.
  • Eye Contact: Rinse with water.
  • Ingestion: Rinse mouth, drink water, consult a doctor if unwell.
5. Fire-Fighting Measures
  • Sodium sulfate is non-flammable.
  • Extinguishing Media: All types suitable.
  • Special Hazards: Toxic fumes (SOx and Na2O) may be emitted.
6. Accidental Release Measures
  • Collect spillage for recycling or disposal.
  • Refer to sections 7, 8, and 13 for protective measures.
7. Handling and Storage
  • Store between -20°C and +50°C, keep dry.
  • Use within 12 months.
8. Exposure Controls/Personal Protection
  • Respiratory Protection: Use a dust respirator.
  • Hand Protection: Wear nitrile/cotton gloves.
  • Eye Protection: Safety glasses recommended.
9. Physical and Chemical Properties
  • Appearance: White crystalline powder
  • Melting Point: 884°C
  • Solubility in Water: 185 g/l at 20°C
10. Stability and Reactivity
  • Stable under recommended conditions.
  • Avoid temperatures above 890°C.
11. Toxicological Information
  • Oral LD50 (mouse): 6346 mg/kg
  • Not mutagenic or teratogenic.
12. Ecological Information
  • Fish Toxicity: 96h-LC50 = 120 mg/l
  • Daphnia Toxicity: 48h-EC50 = 2564 mg/l
13. Disposal Considerations
  • Dispose according to local regulations.
14. Transport Information
  • Not restricted for land, sea, or air transport.
15. Regulatory Information
  • Not classified as hazardous under EC regulations.
16. Other Information
  • Used in glass, cement, coatings, chemical, and detergent industries.
  • Safe for use in food and pharmaceuticals under applicable regulations.
See more

Catalog excerpts

Technical product information  Sodium sulfate, anhydrous -1

Technical product information Sodium sulfate, anhydrous Page: 1 Date: 1. Dezember 2003 Identification of the substance and of the company Chemical designation Sodium sulfate, anhydrous Use of the substance Industrial Uses: Uses in preparation at industrial sites Details of supplier of the safety data sheet Manufacturer/supplier Industrie Center Obernburg Emergency information Cordenka GmbH & Co. KG Werk Obernburg (DE) Telephone +49 6022 81 3262 Weekdays: 08.00 h – 16.00 h Hazard Identification This product is a material in the sense of the chemical law. Information about dangerous contents Chemical description Sodium sulfate, anhydrous This substance is not classified as dangerous according to European legislation. Labelling This product is not classified as dangerous substance according to EU regulation (EC) No1272/2008 (CLP regulation) This product does not need to be labelled in accordance with EC directives and national law (Labelling 67/548/EEC or 1999/45/EC) Other Hazards This product is not classified as dangerous substance according to EU regulation

 Open the catalog to page 1
Technical product information  Sodium sulfate, anhydrous -2

Date: 1. Dezember 2003 updated: 31. July 2025 3. Composition/Information on ingredients 3.1 Substance Formular weight-% Molar Mass Chemischer Name 142.04 g/mol Sodium sulfate EINECS -Number Index-Number Symbol 4. First aid measures 4.1. Signs and consequences Dust can affect the respiratory system attractive and cause bronchitis symptoms. In all cases of doubt or if the symptoms continue, medical treatment is necessary. 4.2.2. After Inhalation Inhale fresh air. 4.2.3. After Skin Contact Remove contaminated clothes. Wash off with water. Rinse with plenty of water. (Remove contact lenses, if worn.)...

 Open the catalog to page 2
Technical product information  Sodium sulfate, anhydrous -3

Date: 1. Dezember 2003 updated: 31. July 2025 5.4 Dangerous corrosion products and combustion products In case of fire: emission of toxic steam (SOx and Na2O). In event of fire, wear self-contained breathing apparatus. Section 8 informs about the personal protective measures. If spilled, collect as much as possible in a clean container for the recycling or disposal. 6.3 Procedures for cleaning / absorption Take up dry. Forward for disposal. Clean up affected area. 6.4 Reference to other sections Protective measures refer to section 7,8,13. Usual precautionary measures while handling with chemicals....

 Open the catalog to page 3
Technical product information  Sodium sulfate, anhydrous -4

Technical product informationSodium sulfate, anhydrous Date: 1. Dezember 2003 updated: 31. July 2025 Humidity: dry, avoid humidity Usage: before 12 months 8.1 Technical preventive measures Avoid inhalation of dust 8.2 Personal protection equipment During dust formation carry a dust respirator (respirator with filter P1) Gloves according to EU directive 89/686/EWG: Type KCL / type KCL Tricotril Art.Nr. 736, Nitrile/Cotton, Thickness: 1,5 mm, break through time: 480 min. Lapren Art.Nr. 706: ,Natural Latex/Chloroprene, Thickness: 0.6 mm, break through time: 480 min. 8.2.3 Eyes Safety glasses 8.2.4...

 Open the catalog to page 4
Technical product information  Sodium sulfate, anhydrous -5

log Pow = -3,0 (berechnet) not applicable not relevant Sodium sulfate mouse: 6346 mg/kg weakly not mutagen not teratogen Technical product informationSodium sulfate, anhydrousDate: 1. Dezember 2003 updated: 31. July 2025 9.10 Steam pressure 9.14 Solubility in other solvents 9.17 Relativ steam density (air = 1) 10.1 Stability Stable with the recommended camp and handling 10.2 Conditions to be avoided Temperatures higher than 890 °C (decomposition and formation of 10.3 Substances to be avoided No information avialable 10.4 Hazardous decompositon products In case of fire: emission of toxic steam...

 Open the catalog to page 5
Technical product information  Sodium sulfate, anhydrous -6

Date: 1. Dezember 2003 updated: 31. July 2025 13.1 Product According to the local regulations. key number: OENORM 51517, European Waste Catalogue: EAK 060314 13.2 Packaging According to the local regulations. Only clean packaging can be returned into recycling process. 13.3 Other information For further information contact producer Transport information Land transport (ADR/RID) ADR/GGVS-class not restricted RID/GGVE-class Gefahr-Nr. TREM-Karte Correct technical name not restricted not relevant not relevant not relevant not relevant not relevant none Vessel transport IMO/IMDG-Code Group of packing...

 Open the catalog to page 6
Technical product information  Sodium sulfate, anhydrous -7

Technical product information Sodium sulfate, anhydrous Page: 7 Date: 1. Dezember 2003 Regulatory information 15.1 Labelling according to EC Directives Other information Cordenka Sodium Sulfate is designed and produced for applications in the glass, cement, coatings, chemical and detergent industry, and is sold for use in such applications. Cordenka Sodium Sulfate is safe to use as an additive for certain foods, in accordance with all applicable regulations for food as well as feedstuff. In addition, it may be used in the manufacture of pharmaceutical products in accordance with all applicable...

 Open the catalog to page 7
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.