*mydirectindustry

WEK

WEK

Product catalog summary

Overview: The document provides technical specifications and features of the Two Way Diverter Valve WEK, designed for use in compounding, extrusion, and materials handling services. It is suitable for fluid groups 1 and 2 according to PED and can be used in Ex-zones with additional accessories.

Specifications:

Pressure Range: 6 bar (87 psi) for system and differential pressure.
Pressure Surge Proof: 10 bar (145 psi) due to heavy-duty design.
Operation Temperature: -20°C to 100°C.
Application: Suitable for distribution or collection in pneumatic conveying systems and gravity pipes for pellet products.
Design: Features a one-channel diverter with a spherical rotor.
Seal Configuration: Seal-free with tight clearance between rotor and housing.
Material of Construction: Cast aluminium, with product contact parts detailed on the next page.

Features:

Quick-clean design.
Switchable with product (optional).
Higher temperature execution (optional).
Actuator available on the left-hand side, with right-hand side as an option.

Dimensions and Weight: The document provides detailed dimensions and weights for various models of the WEK diverter valve, ranging from ND 100 to ND 400, with corresponding inlet/outlet sizes and weights.

Catalog excerpts

>compounding & extrusion >materials handling >service Two way diverter Valve WEK. _ _ _ _ _ _ _ _ Suitable for fluidgroup 1 and 2 according PED Applicable in Ex-zones with additional accessories Cross seal between the outlets* Product wetted parts, hard coated or out of stainless steel* Quick-clean design Switchable with product* Higher temperature execution* Actuator on the left-hand side (right-hand side*) * Option Housing cover Rotor Housing Actuator Straight through: Productline components | 2010 Diverted:

Open the catalog to page 1

>compounding & extrusion >materials handling >service DIVERTER VALVE | WEK PRESSURE RANGE PRESSURE SURGE PROOF OPERATION TEMPERATURE APPLICATION DESIGN SEAL CONFIGURATION 6 bar (87 psi), system and differential pressure 10 bar (145 psi), due to heavy duty design -20°C up to 100°C For distribution or collection in pneumatic conveying systems and in gravity pipes for pellets products One channel diverter with spherical rotor Seal free, tight clearance between rotor and housing MATERIAL OF CONSTRUCTION Cast aluminium, for product contact parts next page Shown with actuator on left-handed-side F...

Open the catalog to page 2