*mydirectindustry

FUH

1 / 2 PagesView full catalog

FUH

Product catalog summary

Specifications:

Suitable for fluid group 2 according to PED.
Available in manual or pneumatic versions.
Designed for all bulk materials with particle sizes d10 > 10 µm and d90 < 6 mm.
Can be installed up to 30° to the horizontal.
Pressure tight support frame option available (5 bar, 73 psi).

Design and Construction:

Gate valve designed for installation between two flanges.
Seal configuration includes a seal in the drop through opening and gland sealed to the outside.
Constructed from stainless steel.

Operational Parameters:

Pressure range: 3.5 bar (51 psi), system and differential pressure.
Operating temperature: -20°C to 100°C.
Suitable for use in silos and hoppers for universal applications.

Dimensions and Weight:

Available in various sizes from ND 100 to ND 600, with corresponding ANSI sizes from 4” to 24”.
Weight varies depending on size and drive type (manual or pneumatic).

Additional Features:

Limit switch available inside (not shown).
Flanges drilled according to DIN PN 10 with metric thread or ANSI 150 lbs with thread in inch.

Catalog excerpts

Universal Gate Valve FUH. _ Suitable for fluid group 2 according to PED _ Small construction height _ Manual or pneumatic version available _ Large cross section in the drop through opening _ Suitable for all bulk materials with d10 > 10 µm and d90 < 6 mm _ Installation position up to 30° to the horizontal _ Pressure tight support frame (5 bar, 73 psi)* * Option Gland seal Support frame Pressure tight support frame (option) Gate blade Housing Gate seal Application example:

Open the catalog to page 1

PRESSURE RANGE 3.5 bar (51 psi), system and differential pressure OPERATION TEMPERATURE Suitable for silos and hoppers for universal application Gate for installation between two flanges SEAL CONFIGURATION Seal in the drop through opening Gland sealed to the outside Stainless steel Ø G2 Limit switch inside (not shown) Other dimensions Manual drive Pneumatic drive * Drilled according to DIN PN 10 with metric thread or ANSI 150 lbs with thread in inch

Open the catalog to page 2