Ceramic Tubes & Rods Catalog
12Pages

ceramic products

table of contents General Ordering Information Terms of Sale Ordering Information Material Designation Contact Information Alumina Extruded Tubing Round Single Bore Round Double Bore Round Four Bore Oval Double Bore Alumina Rods As Fired Ground Square/Rectangular Alumina and Zirconia Rods As Fired Ground TTZ As Fired Rods YTZP As Fired Rods Alumina Cast Tubing Fish Spine Beads Rectangular Plates Mullite Extruded Tubing Round Single Bore Round Double Bore Round Four Bore Mullite Cast Tubing Yttria Fully Stabilized Zirconia Plastic Material Comparison Chart Physical Properties Mechanical...

general ordering information terms of sale • In stock items will typically ship in 3 to 5 working days. • Expedited shipment available for a nominal fee. • Terms: Net 30 days (with approved credit). Master Card, Visa, and American Express accepted. • Minimum line item charge is applicable. • CoorTek standard terms and conditions apply. • Verbal orders are placed at the risk of the purchaser. • CoorsTek reserves the right to add or discontinue items at any time without notice. ordering information Standard Cast Products: Please specify the following when ordering: • Quantity • Outside...

alumina extruded tubing Diameter tolerance ± 3% or ± 0.003" (0.076 mm), whichever is greater. Straightness: ≤ 0.003"/1.000" cumulative Diameter tolerance ± 5%. Straightness: ≤ 0.003"/1.000" cumulative Diameter tolerance ± 3% or ± 0.003" (0.076 mm), whichever is greater. Straightness: ≤ 0.003"/1.000" cumulative AD-998 Round Four Bore Tubing OD Inch 0.063 0.085 0.094 0.109 Diameter tolerance ± 3% or ± 0.003" (0.076 mm), whichever is greater. Straightness: ≤ 0.003"/1.000" cumulative AD-998 Oval Double Bore Tubing OD Inch Diameter tolerance ± 3% or ± 0.003" (0.076 mm), whichever is greater....

ALUMINA RODS Diameter tolerance ± 3% or ± 0.003" (0.076 mm), whichever is greater. Straightness: Diameter tolerance ± 5%. Straightness: < 0.00371.000" cumulative * Isostatically pressed 0.003" (0.076 mm), whichever is greater. Straightness: < 0.01071.000" cumulative Diameter tolerance : Width/Thickness Inch Width/Thickness mm Part# Diameter tolerance ± 3%. Straightness: < 0.00371.000" cumulative Maximum twist 2° per foot. Width/Thickness Inch Width/Thickness mm Part# Consult www.coorstek.com for latest product offering

ALUMINA AND ZIRCONIA RODS : 0.003" (0.076 mm), whichever is greater. Straightness: < 0.00371.000" cumulative Diameter tolerance ± 5%. Straightness: < 0.00371.000" cumulative Diameter tolerance ± 0.001" or ± 0.025 mm. Straightness: < 0.00171.000" cumulative * Isostatically pressed 0.003" (0.076 mm), whichever is greater. Straightness: < 0.00371.000" cumulative YTZP As Fired Rods Diameter tolerance ± 3% or ± 0.003" (0.076 mm), whichever is greater. Straightness: < 0.00371.000" cumulative Consult www.coorstek.com for latest product offering

alumina cast tubing Diameter tolerance ± 5% or ± 0.030" (0.76 mm), whichever is greater. Straightness: ≤ 0.006"/1.000" cumulative * Available in single reduced end (SRE). † Available on a special order basis. Open Both Ends (OBE) Flat Closed One End (FCOE) AD-998 Dee Tubing to fit tubes with the following ID sizes ID Inch 1.500 1.750 2.000 2.250 Diameter tolerance ± 5% or ± 0.030" (0.76 mm), whichever is greater. Straightness: ≤ 0.006"/1.000" cumulative Tooling available in other sizes – please inquire. Consult www.coorstek.com for latest product offering

FISH SPINE BEADS AD-995 Fish Spine Beads Diameter tolerance : Length Inch 2% or ± 0.003" (0.076 mm), whichever is greater. Length tolerance ± 0.010" RECTANGULAR PLATES Width Inch Length Inch Thickness Inch Width mm Length mm Thickness mm Material Part# Tolerance ± 2%. Straightness: < 0.00671.000" cumulative MULLITE EXTRUDED TUBING Mullite Round Single Bore Tubing Diameter tolerance ± 3% or ± 0.003" (0.076 mm), whichever is greater. Straightness: < 0.00371.000" cumulative Diameter tolerance ± 5%. Straightness: < 0.00371.000" cumulative Consult www.coorstek.com for latest product offering

mullite extruded tubing Mullite Round Double Bore Tubing OD Inch 0.063 x 0.125 x 0.188 x Diameter tolerance ± 3% or ± 0.003" (0.076 mm), whichever is greater. Straightness: ≤ 0.003"/1.000" cumulative Mullite Round Four Bore Tubing OD Inch 0.188 x Diameter tolerance ± 3% or ± 0.003” (0.076 mm), whichever is greater. Straightness: ≤ 0.003”/1.000” cumulative Tooling available in other sizes – please inquire. mullite cast tubing Diameter tolerance ± 5% or ± 0.030" (0.76 mm), whichever is greater. Straightness: ≤ 0.006"/1.000" cumulative * Available in single reduced end (SRE). Open Both Ends...

yttria fully stabilized zirconia (zdy) CoorsTek ZDY zirconia system is specifically designed to work in applications where oxygen ionic conductivity or extreme temperature resistance is required. CoorsTek Oxygen Sensors and Carbon Probe electrolytes will be your choice when your application demands: • High output (> 98% of theoretical by the Nernst equation) • Low offset (< 0.5m V at 750º C) • Low internal resistance (< 25 ohms at 750º C) • Quick response times CoorsTek can provide electrolyte cells from bare zirconia to platinum metallized--with or without platinum lead attachment. Other...

material comparison chart Mullite PROPERTIES Physical Properties Density Color Permeability Mechanical Properties Elastic Modulus Typical 20º C Flexural Strength (MOR) Typical 20º C Typical 1000º C Compressive Strength Typical 20º C Fracture Toughness Range NOTCHED BEAM Coefficient of Thermal Expansion 25 to 1000º C j/kgºK (cal/g/ºC) Thermal Shock (Note 1) AC-kv/mm (AC-volts/mil) Good thermal shock resistance NOT recommended for high temp. vacuum application (low cost) Easily metallized with good electrical properties Thermal Properties Electrical Properties Dielectric Strength 6.25 mm...