Catalogs >
CoorsTek >
AlN Water Cooling Box / Heat Exchanger

AlN Water Cooling Box / Heat Exchanger
4Pages

Catalog excerpts

AlN Water Cooling Box / Heat Exchanger - 1

Amazing Solutions”

AlN Water Cooling Box / Heat Exchanger - 2

Technical Description The flat solid water-cooler with lapped surfaces is made out of aluminium nitride ceramic (AlN). Cooling plugs, arranged in form of waffles inside the box, provide an excellent heat transfer from the ceramic to the cooling water. Polyethylene water connections are inserted with two seal rings. Also other connection systems, e.g. alumina tubes or tubes made out of other different plastics are known. Measuring Method Data of coolant flow, pressure drop and thermal resistance refer to one cooling box. For measurements a test unit is built out of 5 similar cooling boxes....

Open the catalog to page 2

AlN Water Cooling Box / Heat Exchanger - 3

Thermal Resistance vs. Flow Volume (different diodes) Thermal Resistance vs. Flow Volume (different wattage) 17 Pressure Drop vs. Flow Volume pressure drop [mbar] Deviation of Measured Values ﬂow volume [l/min] 4 different cooling boxes of different lots at a power loss of 1,5 kW using diodes YSD 35 with 78 mm diameter

Open the catalog to page 3

AlN Water Cooling Box / Heat Exchanger - 4

Different versions, eg. without center bore hole, different OD or position of the bore holes are available on request Design of Cooling Box Used more than 20 years in German, Spanish, and Swiss railway systems. Also used in rectifiers of wind turbines in Germany, Denmark, Scottland, and Australia since 2002. Different customer specified sizes and shapes available on request. For more information on CoorsTek technical ceramics or any of our other state-of-the-art products: call us at +49 (0) 9208.6591.0 or email us at info_anceram@coorstek.com. The chart is intended to illustrate typical...

Open the catalog to page 4