Titan Ground Power cable assemblies and adapters 400Hz aviation ground power solutions

Titan Ground Power solutions include six-around-one jacketed and AS7974 qualified banded configurations Eaton's ground-power brands have been preferred by airports and aviation OEMs since 1946. An extensive range of standard and custom solutions includes 28VDC, 270VDC, and 400Hz cable assemblies and receptacles. The Titan Ground Power Series is an addition to the Burton family of aviation products. Advantages of this 400Hz product line include improved electrical performance and extended service life for cable assemblies and aircraft receptacles. Cable Configurations Page Six Around One, Single...

Significantly reduced downtime - plugs can mate directly to aircraft after removing a damaged adapter Plugs can be used with or without adapters, reducing operations, repair, and inventory costs. Floating sockets independently align to pins, reducing wear on aircraft receptacles. Compression seals protect sockets and pins against contaminants. Adapters utilize standard bolts and can be replaced in minutes. Optional field replaceable adapter can be replaced for less than 50% of the cost of cable refurbishment. Reduced mating forces extend the lives of aircraft receptacles and cable assemblies...

Six-tine sockets outperform industry standards for electrical performance Design verification testing has proven that the six-tine-socket utilized in Titan Ground Power solutions has a voltage drop of 31-millivolts at 300 amps; significantly less than the industry standard of 45-millivolts. Additional design advantages include improved engagementforce consistency, which contributes to extending the service lives of ground-power plugs and receptacles. Solutions include six-around-one cable assemblies Six around one cables deliver consistent phaseto-phase reactance, and lower voltage drops, to...

Six around one, jacketed cable assemblies, 3/8-inch neutral lug Terminal for 5/16” stud, 2 places •• 3/8-inch power lugs and neutral lug •• Silver-plated contacts, neoprene jacket •• 1/2-inch neutral-lug cables are listed on page 6. Terminal for 3/8” stud, 4 places N C ­Part Numbers Length (feet) Length (meters) Cable Description 260 Amps 6-4 AWG Cables 1-1 AWG Cable 4-14 AWG Control Leads 300 Amps 6-2 AWG Cables 1- 2/0 AWG Cable 4-14 AWG Control Leads 260 Amps 6-4 AWG Cables 1-1 AWG Cable No Control Leads E and F Shunted in Plug 300 Amps 6-2 AWG Cables 1-2/0 AWG Cable No Control Leads E and...

Six around one, jacketed cable assemblies,1/2-inch neutral lug Terminal for 5/16” stud, 2 places •• 3/8-inch power lugs and 1/2-inch neutral lug •• Silver-plated contacts, neoprene jacket Terminal for 1/2” stud, 1 place N C ­Part Numbers Length (feet) Length (meters) Cable Description 260 Amps 6-4 AWG Cables 1-1 AWG Cable 4-14 AWG Control Leads 300 Amps 6-2 AWG Cables 1-2/0 AWG Cable 4-14 AWG Control Leads 260 Amps 6-4 AWG Cables 1-1 AWG Cable No Control Leads E and F Shunted in Plug 300 Amps 6-2 AWG Cables 1-2/0 AWG Cable No Control Leads E and F Shunted in Plug 260 Amps 6-4 AWG Cables 1-1 AWG...

Command plus, jacketed-cable assemblies Terminal for 5/16” stud, 2 places •• 3/8-inch power lugs and neutral lug •• Silver-plated contacts, neoprene jacket ­Part Numbers Terminal for 3/8” stud, 4 places Length Length (feet) Length (meters) Cable Description 3-1/0 AWG Cables 3-6 AWG Cables 2-12 AWG Control Leads 3-2/0 AWG Cables 3-4 AWG Cables 2-12 AWG Control Leads 3-1/0 AWG Cables 3-6 AWG Cables No Control Leads E and F Shunted in Plug 3-2/0 AWG Cables 3-4 AWG Cables No Control Leads E and F Shunted in Plug 3-1/0 AWG Cables 3-6 AWG Cables 2-12 AWG Control Leads E and F Shunted in Plug 3-2/0...

AS7974 qualified, non-metallic banded cable assemblies •• 3/8-inch power lugs, 1/2-inch neutral lug •• Silver-plated contacts •• Abrasion-resistant cables significantly extend service life. Terminal for 1/2” stud, 1 Place Terminal for 5/16” stud, 2 places ­Part Numbers Length (feet) Length (meters) All products listed above are compatible with the optional adapter, part number 16CS-0000-0001 8 Terminal for 3/8” stud, 3 places EATON Titan Ground Power Cables and Adapters Cable Description 4-1/0 AWG Cables 1-12/2 Control Leads 4-2/0 AWG Cables 1-12/2 Control Leads 4-1/0 AWG Cables No Control Leads...

Stainless steel, banded-cable assemblies •• 3/8-inch power lugs and neutral lug •• Silver-plated contacts •• Abrasion-resistant cables significantly extend service life. Terminal For 5/16” Stud, 2 Places N C ­Part Numbers Terminal For 3/8” Stud, 4 Places Length (feet) Length (meters) Cable Description 4-2/0 AWG Cables 1-12/2 Control Leads 4-1/0 AWG Cables No Control Leads E and F Shunted in Plug 4-2/0 AWG Cables No Control Leads E and F Shunted in Plug 4-1/0 AWG Cables 1-12/2 Control Leads E and F Shunted in Plug 4-2/0 AWG Cables 1-12/2 Control Leads E and F Shunted in Plug Weight (lbs./kg) Cable...

Jumper cable assembly N Single point refueling cable N Extension cable assembly E ­Cable Type Eaton Part # Military Part # Length Feet/Meters Cable Description Weight (lbs./kg) Jumper Cable 4-1/0 AWG Cables 1-12/2 Control Lead Stainless-Steel Bands Single Point Refueling 4-4 AWG Cables 1-12/2 Control Lead Non-Metallic Bands Red-Color Connectors 4-1/0 AWG Cables 1-12/2 Control Lead Stainless-Steel Bands Extension Cable The cable assemblies listed above are not compatible with the Titan Ground Power field-replaceable adapters. EATON Titan Ground Power Cables and Adapters Cable Configuration

Additional solutions from the Burton™ family of aviation ground-power products 400Hz military and commercial solutions •• Airframe and GPU-mounted 115, 200, 240, 416, and 480V receptacles. •• Receptacle options: shields, replaceable contacts, and spring-loaded covers. •• Plugs types: molded onto the cable with integral strain relief, field replaceable, and models with integrated electrical switches. •• Circular-plug cables and B1-B cable assemblies. •• Banded and single-jacketed cable configurations. •• Jumpers, single-point refueling, extensions, and Y adapter cables. •• A complete range of...