Circuit Protection Products for the Electrical Industry
443Pages

Bussmann Circuit Protection Products for the Electrical Industry Bussmann

2010fulllinecoverRRDSpecs table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.80pt "Arial", sans-serif; } .font1 { font:5.00pt "Arial", sans-serif; } .font2 { font:6.00pt "Arial", sans-serif; } .font3 { font:8.00pt "Arial", sans-serif; } .font4 { font:12.00pt "Arial", sans-serif; } .font5 { font:13.00pt "Arial", sans-serif; } .font6 { font:17.00pt "Arial", sans-serif; } CircuitProtectionProductsfortheElectricalIndustry Bussmamr Selecting Circuit Protection The following fuse slection guides are based on the 2005 NEC® and provided fuse recommendations for the...

Circuit Protection Products for the Electrical Industry COOPER Bussmann Selecting Circuit Protection Electric Heat (NEC® 424) Electric Space Heating Size at 125% or next size larger but in no case larger than 60 Fuse Recommendation Volts Fuse(s) 0-250 LPN-RK_SP FRN-R, NON 0-300 JJN 0-480 SC 25 to SC 60 0-600 LPS-RK_SP FRS-R, NOS 0-600 JJS 0-600 LPJ_SP, LP-CC FNQ-R, JKS, KTK-R, TCF,SC J2to SC 20 amps for each subdivided load. Electric Boilers with Size at 125% or next size larger but in no case larger than 150 Rsistance Type Immersion Heating Elements in an ASME Rated and Stamped Vessel amps...

circuit protection products for the electrical industry Bussmanir Selecting Circuit Protection Motor Loads (NEC® 430) 600V & Less Fuse Sized For: Fuse Recommendations Volts Fuse(s) 0-250 FRN-R 0-600 FRS-R Fuse Recommendations Volts Fuse(s) 0-250 LPN-RK_SP 0-600 LPS-RK_SP Fuse Recommendations Volts Fuse(s) 0-250 LPN-RK_SP, FRN-R 0-600 LPS-RK_SP, FRS-R 0-600 LPJ_SP, TCF Fuse Recommendations Volts Fuse(s) 0-250 KTN-R, NON 0-300 JJN 0-600 KTS-R, NOS 0-600 JJS 0-600 LP-CC, JKS, KTK-R, LPT correspond to a standard size). If this will not allow motor to start due to higher than normal inrush...

Circuit Protection Products for the Electrical Industry COOPER Bussmann Selecting Circuit Protection Transformers 600V Nominal or Less (NEC® 450.3) Primary Protection Only Note: Components on the secondary still need overcurrent protection Rated primary current less Optimum Protection NEC® Maximums Max. 300% or next size smaller (See NEC* 430.72(C) for control circuit transformer -125% or next size larger than 2 amps maximum of 500% Rated primary current greater than or equal to 2 amps but less than 9 amps -125% or next size larger Max. 167% or next size smaller Rated primary current...

001-061.indd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:8.00pt "Arial", sans-serif; } .font2 { font:8.25pt "Arial", sans-serif; } .font3 { font:17.00pt "Arial", sans-serif; } .font4 { font:15.00pt "Times New Roman", serif; } CircuitProtectionProductsfortheElectricalIndustry Bussmann Selecting Circuit Protection Transformers Over 600V Nominal (NEC® 450.3) Supervised Installations Primary Protection Primary at code max. of 250% or next standard size if 250% does not corre- Note: Components on the secondary still...

Low Voltage, Branch Circuit Rated Fuses Bussmann Low-Peak* Time-delay, Rejection-Type Fuses LP-CC Class CC Spcifications Description: Time-delay. currenUimiting, rejection-type fuse - 12 seconds (minimum) at 200% rated amps- Dimensions: %*x 1 W (10,3 x 38.1mm). Ratlngs: Votts GOOVac (or less) 闗 300Vdc (tf-2tfaA & 20-30A) 150Vdc (3-15A) Amps ח J4-30A IR 200kARMS Sym. ח 20kADC Agency Information: CE, Sld. 248-4, Class Guide JDDZ, File e4273,CSA Certified; Class 1FHG 53787. Time Current CharacteristicsAveraqe Melt RAT NG CC, UL Usted 422-02. Features and Benefits > Time delay coupled wlth...

Low Voltage, Branch Circuit Rated Fuses Bussmamr CC-Tron® Rejection-type Fuses FNQ-R Class CC Specifications Description: Time-delay, branch circuit, rejection-type fuse. Dimensions: %"x 1 J2" (10.3 x 38.1mm). Ratings: Volts 600Vac (or less); 300Vdc (15-20A) Amps ח X-30A IR 200kA RMS Sym.; 20kA DC Agency Information: CE, Std. 248-4, Class CC, UL Listed, Guide JDDZ, File E4273 CSA Certified, Class 1422-01, File 53787. Features and Benefits ו Time delay compatible with inrush characteristic of small control transformers. Current limitation at Class CC levels provides maximum component...

Low Voltage, Branch Circuit Rated Fuses Bussmann Limitron® Rejection-type Fuses KTK-R Class CC Time-Current Characteristic CurvesAverage Melt Spשcifications Description: Fast-acting. branch circuit, rejection-type fuse. Dimensions: %" x 1 JT (10.3 x 38.1mm). Ratings: Volts 600Vac (orless) Amps ח Mo-30A IR 200kA RMS Sym. Agency Information: CE. Std. 248-4. Class CC. UL Listed. Guide JDDZ, File E4273 CSA Certified, File 53787, Class 1422-02. Foaturos and Bonofits Current limitation at Class CC levels provides maximum component short-circuit current protection. 200kA interrupting rating...

Low Voltage, Branch Circuit Rated Fuses Bussmamr CUBEFuse® Finger-safe Fuse and Fuse Holder System TCF & TCF_RN (fuse) Class CF TCFH_N (holder) Fuse Catalog Numbers Indicating (Amps) TCF6 TCF25 TCF50 TCF100 TCF10 TCF30 TCF60 TCF15 TCF35 TCF70 TCF17-/2 TCF40 TCF80 TCF20 TCF45 TCF90 Fuse Catalog Numbers Non-Indicating (Amps) TCF1RN TCF17-^RN TCF40RN TCF80RN TCF3RN TCF20RN TCF45RN TCF90RN TCF6RN TCF25RN TCF50RN TCF100RN TCF10RN TCF30RN TCF60RN Available With Indication Specifications Description: Finger-safe fuse and fuse holder system; dual-element, time-delay fuse; 10 seconds minimum...

Low Voltage, Branch Circuit Rated Fuses Bussmamr Time-delay Fuses SC Class G Spcifications Description: Fast-acting (J2-6A), time-delay (7-60A)fuse. Dimensions: See dimensions illustration. Ratings: Volts 600Vac (J2-20A) 闗 480Vac (25-60A) 170Vdc (J2-20A) ח 300Vdc (30 & 60A only) Amps J2-60A IR ח 100kA RMS Sym. 10kA DC Agency Information: CE, Std. 248-5, Guide JDDZ, File E4273, CSA Certified, 53787. Time-Current Characteristic CurvesחAverage Melt Class G, UL Listed, Class 1422-01, File Features and Benefits Current limiting for component protection, providing Class G energy-limitation for...