AUTOMATIC FIBER OPTIC CLEANER AUTOMAT I C FIBER OPTIC CLEANER TP-125MK-III Cleans Fiber Optic End In Less Than 3 Seconds Designed especially for use in production facilities, the Model TP-125MK-III automatic fiber optic cleaner, cleans a single fiber end fast, repeatedly and without static residue in less than 3 seconds. What has previously taken minutes for an operator, can now be done in a much shorter period of time. The Model TP-125MK-III is most cost-effective in production facilities where a large number of prepared fibers are required. Features • Fast operation in less than 3 seconds • Simple • Repeatable • Without static residue • No cracks or damage to the fiber Applications • Production Facilities • Terminating • Connectorizing • Metalization • Fiber optic sensor mounting • Laser mounting • Fiber splicing • Fiber optic coupler manufacturing • Fiber optic device manufacturing Buy online at www.cookecorp.com

How does it work? In a typical production facility, fibers must be stripped of their jacket to give a continuous, perfectly clean reliable cladding surface. First the operator mechanically removes all coatings from the fiber, up to and including the primary jacket. This process usually results in debris remaining on the cladding surface. Until now, removing this debris has been a cumbersome, tedious, and rather unreliable process of manually rubbing the fiber with cotton and alcohol. The Model TP-125MK-III makes it possible to eliminate this debris fast, repeatedly, and without static residue....