Overhead monorail chain conveyor : 1200 Series Description The overhead monorail chain conveyor 1200 series is a motorized handling system by track and chain for ligth loads. Loads are carried by the conveyor chain. The chain speed can be continuous with speed variation or step by step. The overhead conveyor chain is characterized by its easy adaptation to sinuous routings. Works of loading and unloading of transported parts by the aerial conveyor may be realized automatically, for example by industrial robots. Supports of transported parts may be designed by CONVOYNORT's team. To protect against dirt falling from the track the aerial conveyor may be used in reversed position. See reversed overhead monorail chain conveyor 1210 series. Specifications Rail section height 40mm x width 40mm x thickness 3mm The track of the chain conveyor can be made of stainless steel. The chain conveyor is fitted with horizontal and vertical bearings, mechanical parts and forged parts. The curves or bends of overhead conveyor are arched sections. They require no idler wheel, no carrier or rotation guide, which eases the maintenance. Maximum temperature 250°C. Maximum weight per pitch : 25 KG - 50 KG Chain pitch INFORMATION The overhead monorail chain conveyor 1200 series can be equipped with rotation devices tooth bar, motorization or 90° in 90°. Components + Track + Clamps + Curve hor. & vert. + Manual or automatic tension unit + Rotation + Straight or wheel drive unit + Lubrication unit Based on the length of the routing and the total load carried, the chain conveyor may receive one or more drive units. Gear wheel Assembly conveyor As for all CONVOYNORT conveyors, delivered components will be assembled on site to each other by bolting, according to the provided assembly drawing. Thus, the assembly time of the aerial conveyor is reduced. Rotated 90° in 90° Headquarters : 625 rue du pont de pierres F- 62400 BETHUNE Phone : +33(0)3 21 57 53 56 Fax : +33(0)3 21 57 51 07 [email protected] www.convoynort.c