*mydirectindustry

M 5262 C

Product catalog summary

Overview: The Compact Swimming Pool Measurement & Regulation Unit, Series M 5262 C, is designed for the measurement and control of free chlorine, pH, and redox levels in swimming pool applications. It features on-line measurement capabilities and includes PI regulation for both free chlorine and pH.

Key Features:

Equipped with galvanically separated current outputs and digital outputs for dosing pumps or motor valve regulation.
Includes two electrodes (gold and copper) for measurement, a mechanical cleaning measurement cell, and a flow armature with pH and redox electrodes.
Features three microprocessor-controlled display units with built-in PI regulators and automatic temperature compensation for accurate measurements.
User-friendly interface with a graphic display and four keys for easy communication with the control unit.

Technical Specifications:

Measuring Ranges: Chlorine: 0-1 mgCl₂/l, pH: 2-12, Redox: 0-1000 mV.
Resolution: pH: 0.01, Redox: 1 mV, Chlorine: 0.01 mg/l.
Deviation: Max 0.5% from MR for pH, max 0.2% from MR for Redox.
Temperature Compensation Range: 0 to +100ºC.
Electrical Data: Supply voltage: 24 VAC±20%, Power: 5 W max, Isolation voltage: 500V.
Current Output: 2 x 4-20 mA, adjustable output range.
Regulator Outputs: 2 x 24 VAC / 250 mA, selectable mode for motor or pump control.

Environmental and Physical Data:

Ambient Temperature: -10 to +50ºC.
Relative Humidity: 10-95% non-condensing.
Protection: IP 65.
Dimensions: 300 x 450 x 70 mm.
Weight: 5.0 kg.
Flow Rate: 0.5 l/min.

Contact Information: Controlmatik ABW, Fajfarjeva 15, 1230 Domzale, Slovenia. Tel: +386 1 72 13 552, Fax: +386 1 72 19 360, Website: www.controlmatik-abw.si

Catalog excerpts

Compact swimmingpool measurment & regulation unit series M 5262 C • on-line free chlorine, pH and redox measurement • PI regulation for free chlorine and pH included • galvanicaly separated current outputs • digital outputs for dosing pumps or motor valve reg. General: Compact swimingpool measurment & regulation unit type M 5262 C is designed for measurment and control of free chlorine, redox and pH in swimming-pools applications. The unit consists of two electrodes (gold and copper measurement electrodes) measurement cell with mechanical cleaning and flow armature with pH and redox electrode and with three microprocessor controlled display units with PI regulator build in and with automatic temperature compensation which provides accurate measured signal on the output and is shown on the graphical display. Each control unit is equipped with PI regulator output and with two galvanically separated 4-20 mA signal on the amplifiers output. Unit can control dosing pumps or motor dosing valve. User can easily communicate with control unit over graphic display and four keys. All this guarantees accurate and continuous measurement and regulation. Mesuring and regulation equipment / Regulatin equipment / Compact swimmingpool unit

Open the catalog to page 1

Mesuring and regulation equipment / Regulatin equipment / Compact swimmingpool unit Units drawing: Order codes : M 5262C/ Measuring ranges Cl - 0-1 mgCl 2/l pH - 2-12 pH Redox - 0 - 1000 mV R - Regulator included C - Current output sensor (4 - 20 mA) D - Communication output - Selecan A - Automatic temperature compensation pH Technical data : Measuring range (M.R.) 0 -14 pH Measured value resolution 0,01pH Deviation of indication, measured value max. 0,5% from MR pH range Automatic temperature compensation range Electrical data : Supply voltage Power 5 W Maximum Isolation voltage Current output...

Open the catalog to page 2

M 5262 C

M 5262 C

Catalog excerpts

All Controlmatik catalogs and technical brochures