Catalogs >
Controlmatik >
M 20 RC

M 20 RC
2Pages

Catalog excerpts

1 Dosing equipment for aggressive gases Full vacuum system for maximum safety Chlorine wetted parts made of high quality materials for maximum reliability The M 20 RC Chlorination System is designed for dosing gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle. The M 20 RC System consists of: M 20 C vacuum regulator with rate valve  M 300 C ejector  It is very simple to mount vacuum regulators. However, installation of the devices must be done by qualified experts taking in consideration all required international standards in order to ensure safe and faultless operation. An authorized service must overhaul the system once a year. Dosing can be set manually with the rate valve on the regulator. It starts or stops when the ejector pump switches on or off. Typical Vacuum Installation from The Chlorine Cylinder to the Ejector 1. Chlorine cylinder 2. Vacuum regulator 3. Ejector 4. Booster pump 1. Chlorine cylinder 2. Gas Chlorine Regulator 3. Outlet 4. Vacuum line 5. Ejector 6. Pressure Gauge 7. Rate Valve 8. Booster Pump 9. Filth filter 10. Collector Line for use

Open the catalog to page 1

1 Dosing equipment for aggressive gases ORDER CODES Model El. Alarm Signal (Full/Empty ) Regulator Gas type Dosing range Ejector Pressure Gauge(y/n) Block connection Yoke OPTIONS: - Alarm: yes “A”, without alarm the letter is not written in the code - Regulator: “R”, means system with all general parts - Gas type: “C” - Cl2, “CO2” - CO2, “S” - SO2, “N” - NH3 - Dosing range (g/h): 1 up to 12 2 up to 25 3 up to 100 4 up to 200 5 up to 500 6 up to 1000 7 up to 2000 8 up to 4000 9 up to 10000 15 up to 15000 - Ejector: “B” - D.P.T. : Ejector with PVC valves designed for pool engineering,...

Open the catalog to page 2