*mydirectindustry

Catalogs
Controlmatik
Aquacon M 5500 C

Aquacon M 5500 C

Product catalog summary

Overview:
The AQUACON M 5500 C is an automatic chlorinator controller designed for managing up to two gas or liquid chlorinators. It is suitable for use in potable water plants, swimming pools, wastewater plants, and industrial applications. The controller offers various control options, including flow-proportional, free chlorine, and a combination of both.

Specifications:

Power Supply: 230 VAC
Fuse: 1 A
Power Consumption: 16 Watts (max)
Operating Temperature: 55 ºC (max)
Display: CD 4 lines x 20 characters
Control Inputs: 2 x 4 - 20mA (1 x flow, 1 x residual)
Control Outputs: Duty chlorinator, Standby chlorinator
Input Resistance: 500 Ohm
Processor: Alpha
Dimensions: 410 x 285 x 140 mm
Weight: 3 kg
Protection: IP 65

Control Options:

Flow Proportional: Chlorine dose is proportional to water flow, controlled via a flow meter signal.
Free Residual Chlorine: Uses a chlorine analyzer signal to adjust dosing based on a set reference value.
Compound Loop: Combines flow-proportional and residual chlorine control, adjusting dosing based on both flow and chlorine analyzer signals.

Installation and Operation:
The AQUACON M 5500 C is designed for easy installation and setup. It communicates effectively with user units and features a robust IP 65 control panel housing. The controller can be configured for single or duty/standby operation, ensuring reliable chlorination management.

Technical Notes:

Input and output signals must be selected at the time of order.
Technical data is subject to change.

Catalog excerpts

Automatic chlorinator controller Type Single or Duty — Standby automatic chlorinator controller Controls up to two automatic gas chlorinators or up to two sodium hypochlorite dosing pumps Different control options (flow, free chlorine, flow and free chlorine) Simple installation, set up and start up Easy user unit communication IP 65 Control panel housing General: AQUACON series M 5500 C is a duty/standby control unit for control of up to two automatic chlorinators — gas or liquid. It is designed to control the process values on portable water plants, swimming pools, waste water plants or in industry. DUTY/STANDBY CHLORINATOR CONTROLLER SINGLE CHLORINATOR CONTROLLER DUTY RESET AQUACON M 5500 C as a single automatic chlorinator controller DUTY CHLORINATOR DUTY CHLORINATOR STANDBY CHLORINATOR DUTY EJECTOR AQUACON M 5500 C as a duty/standby automatic chlorinator controller STANDBY EJECTOR Measuring and regulation equipment \ Regulation equipment \ AQUACON M 5500 C BUL02042 -2/2010 BUL02042-

Open the catalog to page 1

Measuring and regulation equipment \ Regulation equipment \ AQUACON M 5500 C Operation: Controller AQUACON M 5500 C controls one or two automatic chlorinators (liquid or gas) on the basis of information received from water flow meter or/and free residual analyzer. If two automatic chlorinators are connected than one is duty and the other is stand by. Different control options are available: 1) Flow-proportional controller, 2) residual chlorine controller, 3) Combination of flow-proportional and residual chlorine controller in one unit. The proper regulation for each individual system can easily...

Open the catalog to page 2

Aquacon M 5500 C

Aquacon M 5500 C

Catalog excerpts

All Controlmatik catalogs and technical brochures