The Type-600 ratio relay volume booster is designed to use apneumatic signal to produce an output pressure which has high flow capacity and can be amplified. This unit is most useful for systems requiring the conversion of a low flow control signal to the higher flow requirements of an operating system. Using an independent supply pressure for greater volume, the Type-600 relays up to 50 SCFM flow capacity to a final control element such asavalve actuator. The standard signal to output ratio is 1:1, however, the Type-600 is also available with an amplified signal to output ratio of 1:2, 1:3 and 1:6. FEATURES High Flow Capacity > Allows flows up to 50 SCFM ՕAmplified Output > Available in a signal to output pressure ratio of 1:1, 1:2, 1:3 and 1:6 Stable Output > Venturi aspirator maintains output pressure under varying flow conditions ՕBalanced Supply Valve > Rolling diaphragm design makes unit insensitive to supply pressure variation Optional Negative Bias > 4psi negative bias option allows "zero" of I/P's Flow Characteristics > 1:31:61:1 The Type-600 is used extensively for increased flow capacity,pressure amplication, or remote pressure control applications. This includes web tensioning, roll loading, control valve acuators,I/Pvolume boosting, cylinder actuation, clutch and brake control,and gas flow control. 1:2Flowscfm Supply=100psig RegulatedPressurepsig 0510 15 20 25 30 35 40 45 50 252015 10 5 02015 10 5 size="-3">