Catalogs >
ControlAir >
T500 Electropneumatic Transducer (I/P, E/P)

T500 Electropneumatic Transducer (I/P, E/P)
4Pages

Catalog excerpts

T500 Electropneumatic Transducer (I/P, E/P) - 1

Type 500X Electropneumatic Transducer (I/P, E/P) > Economical and reliable electrical conversion to pressure The ControlAir Type 500Xconverts a current or voltage input signal to a linearly pro- portional pneumatic output pressure. This versatile instru- ment is designed for controlapplications that require ahigh degree of reliability and repeatability at an economical cost. Optional NEMA 4X (IP65) version allows for splashdown and outdoor installation. Typically, these units are used for applications that require the operation of valve actuators, pneumatic valve positioners, damper and louver actuators, finalcontrol elements, relays, air cylinders, web tensioners,clutches, and brakes. Industries that utilize the Type 500X include Petrochemical, HVAC, Energy Management, Textile, Paper, Paper Converting, Food and Drug Features Low CostՕIntegral Volume BoosterCompact Size ՕLow Air Consumption Field Reversible ՕFlexible Zero & Span AdjustmentsStandard Process InputsՕSplit Ranging size="-2">

Open the catalog to page 1

T500 Electropneumatic Transducer (I/P, E/P) - 3

Min./Max. Supply Pressure Minimum - 3 psig (.21 BAR)Minimum - 5 psig (0.35 BAR)Above maximum outputabove maximum output Maximum - 100 psig (7 BAR)Maximum - 150 psig (10.5 BAR) Supply Pressure Sensitivity < 0.1% of span per psig<ѱ .04% of span per 1.0 psig (< 0.15% of span per 0.1 BAR)(0.07 BAR) Terminal Based Linearity <ѱ 0.75% of span< 1.5% of span typical, ѱ 2.0% max. Repeatability < 0.5% of span< 0.5% of span Hysteresis < 1.0% of span< 0.5% of span Response Time Dependent on pressure range - typically less than 0.25 sec for 3-15 psig units Flow Rate 4.5 scfm (7.6 m3/hr ANR) at20.0 scfm...

Open the catalog to page 3