UniPoint
4Pages

UniPoint is a stand-alone universal s Direct Digital Controller (DDC) especially designed to control and monitor heating, ventilation and air conditioning systems (HVAC) as well as energy and electrical systems. UniPoint is the optimal solution for controlling and monitoring public, commercial buildings, hospitals Universal Input/Output Points The UniPoint input and output points are especially designed to be completely compatible with the conventional HVAC and electrical control equipment regularly used in the market. The UniPoint controller can operate standard control equipment, such as...

HVAC Software Library Communications between the controllers and the control center is made via ETHERNET using (TCP/IP). The controller also may be provided with up to two additional optional communications ports according to the table shown on the right. When programming the UniPoint DDC controller, the programmer may take advantage of the HVAC software library supplied with the system or use his/her own software modules and enter them into the library. The library supplied with the UniPoint contains many standard modules used for HVAC applications, electrical and building control...

Energy Saving Programs OPTIMUM START/STOP time programs that calculate optimal start times needed to achieve desired comfort level as well as the optimal stop time needed in order to preserve the desired comfort condition for the remaining occupancy time. ENTHALPY CONTROL utilizes fresh air for cooling when the calculated fresh air enthalpy is less than the return air enthalpy. NIGHT PURGE enables the entry of cool fresh air into the building at night to pre-cool and purge the air inside. Power Requirements Voltage 24AC ± 20% Minimum Transformer Size 50VA Frequency 50/60 Hz Shipping Weight...