1. Catalogs
  2. CONTRINEX
  3. Synthetic fiber for liquid-level monitoring

Synthetic fiber for liquid-level monitoring

Synthetic fiber for liquid-level monitoring

Synthetic fiber for liquid-level monitoring

Product catalog summary
Specifications:
  • Detection of liquids in contact, excluding white milky liquids.
  • Fully potted optical components.
  • Two individual fibers with an outer diameter of 2.2 mm.
  • Fine inner fiber with a diameter of 0.5 mm for high resolution.
  • Fibers can be cut to size.
Benefits:
  • Scratch-resistant and easy-to-clean glass prism.
  • V2A stainless steel housing.
  • Waterproof with a protection rating of IP 68.
  • Lightweight at 28 grams.
Technical Data:
  • Ambient temperature range: -25 to +70°C.
  • Fiber bending radius: 25 mm.
  • Outer fiber diameter: 2.2 mm.
  • Maximum tensile load: 30 N.
  • Inner fiber diameter: 0.5 mm.
  • Weight: 28 g.
  • Protection degree of sensing head: IP 68.
  • Fiber material: PMMA.
  • Sleeve material: PE.
  • Sensing head material: Stainless steel V2A.
  • Prism material: Glass.
  • Standard length: 2 m ± 0.1 m.
Operating Principle:

The device is designed for liquid-level detection using synthetic optical fibers. It is not suitable for applications where human safety depends on its function. The product is certified under ISO 9001:2000 standards.

Important Notes:

These devices must not be used in applications where the safety of people is dependent on their functioning. Terms of delivery and rights to change design are reserved.

See more

Catalog excerpts

Synthetic fiber for liquid-level monitoring-1

Eigenschaften – Erfassung von Flüssigkeiten in Kontakt (ausser weisse milchige Flüssigkeiten) – Vollständig vergossene Optik – 2 Einzelfasern, Aussendurchmesser 2,2 mm – Feine Innenfaser Ø 0,5 mm für höchste Auflösung – Schneidbar Vorteile – Prisma aus Glas, daher kratzfest und einfache Reinigung – Gehäuse aus Edelstahl V2A – Dicht (Schutzart: IP 68) – Gewicht: 28 g Caractéristiques – Détection de liquide en contact (à l'exception des liquides blancs laiteux) – Optique complètement moulée – 2 fibres individuelles, diamètre extérieur 2,2 mm – Fibre intérieure mince Ø 0,5 mm pour une résolution optimale – Peuvent être découpées Avantages – Prisme en verre, donc inrayable et nettoyage aisé – Boîtier en acier INOX V2A – Etanche (indice de protection: IP 68) – Poids: 28 g Features – Contact liquid detection (with the exception of white milky liquids) – Fully potted optical parts – 2 individual fibers, outside diameter 2.2 mm – Fine inner fiber Ø 0.5 mm for highest resolution – Can be cut Benefits – Scratch-resistant, easy-to-clean glass prism – V2A stainless-steel housing – Impervious (degree of protection: IP 68) – Weight: 28 g Kunststofffaser-Lichtleiter zur Füllstandskontrolle Fibres optiques synthétiques pour la détection du niveau de liquide Synthetic optical fibers for liquid-level detection

 Open the catalog to page 1
Synthetic fiber for liquid-level monitoring-2

CONTRINEX AG Industrial Electronics route André Piller 50 - CH 1762 Givisiez - Switzerland - Tel: +41 26 460 46 46 - Fax: +41 26 460 46 40 - Internet: www.contrinex.com - E-mail: [email protected] Flüssigkeit liquide liquid Luft air air Licht lumière light Flüssigkeit liquide liquid Luft air air Licht lumière light Ihr Vertriebspartner: Votre conseiller de vente: Your sales agent: ISO9001:2000 Certified Management System Reg. N° 11397 Der Einsatz dieser Geräte in Anwendungen, wo die Sicherheit von Personen von deren Funktion abhängt, ist unzulässig. Änderungen und Liefermöglichkeiten vorbehalten....

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.