Mining brochure
12Pages

High quality hoses mining industry

ContiTech – your strong partner for the mining industry! ContiTech Fluid Technology is a development partner and original equipment manufacturer of hoses and hose assemblies for automobile and heavy industry applications. Our expertise in design and material engineering as well as our manufacturing process are the basis for the safe and smooth transportation of all media. Our high quality hoses for industrial and commercial applications can be used in many ways. For decades, they have proven themselves in continuous use under the most grueling conditions. They are characterized by their...

CONTI® AirStar Compressed Air Hoses with fabric reinforcement, primarily used by the mining industry for compressed air and industrial water. Certified by the German mining authorities (LOBA, §10BVOSt). q black, non-porous and extruded smooth rubber lining q reinforcement: synthetic fibres q black rubber-cover, resistant to ageing, abrasion,  water and air containing oil q antistatic R<106 Ω/m q temperature range from -30°C/-22°F up to  +80°C/+176°F q self-extinguishing q marking differs in parts Technical data Nominal width  Wall thickness Working pressure Minimum burst pressure Bending...

CONTI® WaterStar SD Air & Water Conveying industrial water, max. 5% aqueous solution of inorganic acid (except for nitric acid) and alkali. Not suitable for potable water. Also suitable for delivering air, compressed air under pressure. q black, moderately chemical resistant rubber lining q reinforcement: synthetic textile, > DN 25 with helical steel wire q black, abrasion and weather resistant rubber cover q temperature range from -25°C/-13°F up to +80°C/+176°F q safety factor: 3 q max. vacuum: 85% from DN 50 upwards q marking differs in parts Technical data Nominal width  Wall thickness...

CONTI® AbrasiveStar SD Pumping and conveying abrasive bulk powder, grain (cement, sand, breakstone, granules etc.) corn and pulp under pressure. Excellent abrasion resistance of tube. q black rubber lining with increased resistance to abrasion q reinforcement: synthetic textile and helical steel wire q black, abrasion and weather resistant rubber cover q temperature range from -25°C/-13°F up to +80°C/+176°F q safety factor: 3 q max. vacuum: 85% Technical data Nominal width  Wall thickness Working pressure Minimum burst pressure Bending radius Coil lengths

Big-bore hoses Big-bore hoses are made of high-quality, synthetic special-rubber compounds. They are manufactured on state-of-the-art, electronically controlled large-hose units. The various production technologies guarantee an absolutely uniform product quality. An overriding quality assurance system to DIN EN ISO 9001:2000 monitors the production process throughout. These hoses are used wherever high quality and long service life are per se prerequisites for the efficient transport of all types of products. Typical application possibilities can be found particularly in different material...

Fittings Socket ends and flange dimensions The dimensions of the expanded socket ends are manufactured to your specifications. Flange dimensions are matched to the required connections. Connections Big-bore hoses can be manufactured in the requisite dimensions and with the desired connection to satisfy operating conditions of all kinds. ContiTech offers the following connection types split flange, e.g. compact conveyor hose systems integral steel flange, concealed attachment, vulcanized in, without lining drawn through integral rubber flange, optional with steel backing flange beaded end...

Long lengths big-bore hoses For various applications to convey industrial water, oil, fuel, compressed air, chemicals, and bulk materials under pressure. Used in mining and tunnelling, oil and gas industry, construction industry and in several other segments. The speciality is that almost unlimited single hose lengths can be supplied without intermediate coupling connection – up to 40 bar working pressure in 50-200 mm ID range. Helix reinforced suction and discharge types are also available up to 100 mm inner diameter. Super Flexible hose Very light and extremely flexible wear resistant...

CONTI® ConcreteStar / ConcreteStar Textile This hose is suitable for the use with hydraulic conveying pumps at highest pressure rates and is used for conveying abrasiv construction material. With its extruded smooth bore tube, made of highly abrasion resistant special compound and the high tension steel reinforcement, the hose is de- signed to meet the strongest requirements at construction site. On request we deliver different coupling types, e.g. Victaulic, Heavy Duty. Also available in special version for mining applications. Certified by the German mining autho- black, non-porous,...

CONTI® MineStar - High pressure injection hose This hose is mainly applied in the mining and building industry. It is a special type of hose which greatly increases its outer diameter when loaded by internal pressure. Fitted into a long bore it expands and seales the hole, thus water or other liquids can be injected through the bore to the required place. The hose closes the way of backflow. Constant pressure for sealing is provided by a ball-valve fitted at the end of the hose. The hoses are fitted at the two ends with different couplings. One coupling is fitted with a ball-valve to ensure...

Chemical Hoses from ContiTech The Conti® CHEM product line is the latest addition to the ContiTech Industrial Hose portfolio. It provides high quality hoses for the most demanding applications in the chemical, pharmaceutical and oil industry. The CONTI ® CHEM hoses are engineered in Germany in accordance with the stringent EN 12115 and with the user’s safety and ergonomic needs in mind. They are available in different types for various applications: q CONTI® CHEM Standard with EPDM lining q CONTI® CHEM Extra with UPE lining, black q CONTI® CHEM Pharma with UPE lining, white q CONTI® CHEM...