CONTI® PIPE
16Pages

{{requestButtons}}

Catalog excerpts

CONTI® PIPE - 1

CONTI® PIPE High-Speed Closed-Trough Belt Conveyor Systems for especially tight curves and high productivity Conveyor Belt Group ContiTech

Open the catalog to page 1
CONTI® PIPE - 3

CONTI® PIPE Conveyor Belts Born of intensive development work and experience ContiTech Conveyor Belt Group Research, development and experience Every conveyor belt, every climate zone and every topography calls for perfect conveyor belt technology. ContiTech provides knowledge, experience, a globally encompassing and competent network and a broad product range to give your conveyor belt applications a technological lead. More than 140 years of rubber expertise make us a strong partner, enabling our customers to benefit from the synergies within the Continental corporation. We implement...

Open the catalog to page 3
CONTI® PIPE - 4

Conveyor Belt Group Design and function of a pipe conveyor system The pipe belt works in accordance with a specific operating principle: at the material feed point (after the tail pulley) the conveyor belt is troughed and is fed at this point like a conventional conveyor belt. After the material feed point the conveyor belt is formed into a closed belt pipe by specially configured finger rollers. Further idlers set along the conveyor route guarantee that the belt is kept closed. As a result, the material conveyed remains protected by the closed belt system. Material feed Upper strand At the...

Open the catalog to page 4
CONTI® PIPE - 5

CONTI® PIPE Conveyor Belts Properties of the pipe belt conveyor system Design-based benefits A pipe conveyor belt differs from a conventional, troughed belt in its design and splicing technology and performs special conveying tasks (see table: Overview of benefits). Mining and industrial applications often require relatively large inclines and tight curves to be overcome in tight spaces and at high mass flow rates. The particular features of modern pipe belt conveyors include: no transfer points, no material spillage along the conveyor route, and tight 3D curves. Pipe belt conveyors save...

Open the catalog to page 5
CONTI® PIPE - 6

Conveyor Belt Group Properties of the pipe belt conveyor system Maximum incline angle = 30° Guide dimensions for design: Belt width Outer diameter Recommended max. fill level Max. volumetric flow rate IV at conveyor speed vF = 1 m/s, max. outer diameter D A = 900* mm and fill level F = 75%: Recommended max. conveyor speeds (depending on idler diameter) Max. lump size (depending on pipe inner diameter and operating data) * Outer diameters greater than D A = 700 mm are handled using our new product CONTI® MegaPipe. We will be happy to provide further information on request. Deviation angle...

Open the catalog to page 6
CONTI® PIPE - 7

CONTI® PIPE Conveyor Belts Belt tensions in a right curve in N/mm N/mm 33 Quality and reliability Just like our conventional conveyor belts, a key feature of our pipe belts is their extremely high quality. They are made of engineered materials which are processed using advanced production technologies. This ensures a high level of reliability and a long service life. Precise testing To guarantee the specified quality standards, extremely precise calculations and test/inspection measures are required. The transverse strength and form of the overlap area are extremely important in ensuring a...

Open the catalog to page 7
CONTI® PIPE - 8

Conveyor Belt Group

Open the catalog to page 8
CONTI® PIPE - 9

CONTI® PIPE Conveyor Belts In addition to consistent quality and technical reliability, highly engineered pipe belt conveyor systems offer a range of other benefits. Plant engineering Benefits of technical plant design: Very tight curves and incline angles up to 30° possible, hence optimal adaptation to local features / terrain / systems Low space requirement thanks to compact design, thus also ideal for underground mining, cement factories, steel mills and power plants No transfer stations as a result of tight horizontal and vertical curves and relatively high incline angles Low...

Open the catalog to page 9
CONTI® PIPE - 10

Conveyor Belt Group Application Examples ENEL OGK-5, GRES Reftinskaya, Russia Partner: TAKRAF The TC tube conveyor system in Siberia with a conveying capacity of 2200 t/h is one of the most exciting systems in the world because it transports hot ash at +90°C in an outside temperature of -45°C at a conveying speed of 5.2 m/s. The temperature differential can actually become even more extreme. The tube conveyor system with its center distance of 4390 m and a 30 m lift uses a 2000 mm wide CONTI ® PIPE 2500 S-K2, 8 : 7, Vulcan T150 with an outer diameter of Ø 570 mm. This is optimally adapted...

Open the catalog to page 10
CONTI® PIPE - 11

CONTI® PIPE Conveyor Belts Bowie Resources Skyline Mine, USA Partner: ThyssenKrupp The BC-8 pipe belt conveyor in the Skyline mine with a 1600 mm wide CONTI ® PIPE 1000 S-K2, 8:6, ContiExtra in the mountains of the US state of Utah is one of the most challenging infrastructure and materials handling solutions worldwide. With a pipe belt outer diameter of approx. Ø 452 mm, the conveyor features 22 horizontal and 45 vertical tight curves with a minimum curve radius of 365 m. The conveyor route precisely follows the existing topographic terrain. With a center distance of 3414 m and a...

Open the catalog to page 11
CONTI® PIPE - 12

Conveyor Belt Group Application Examples AES Maritza East 1, Bulgaria Partner: TAKRAF The TC-3A tube conveyor in the AES Maritza East 1 power plant with its center distance of 4532 m and a lift of approx. 25 m offers an excellent fit with the local conditions and the existing infrastructure in Galabovo (railroad, village). The conveyor is equipped with a CONTI ® PIPE 1500 S-K2, 7 : 6, ContiExtra and has 8 horizontal and 7 vertical tight curves. With an outer pipe diameter of Ø 430 mm in the upper strand and Ø 400 mm in the lower strand, 1400 t/h of ash is carried by the pipe belt at a...

Open the catalog to page 12
CONTI® PIPE - 13

CONTI® PIPE Conveyor Belts Linz Service GmbH, Austria Partner: BEUMER The pipe belt conveyor carries 40 t/h at a conveyor speed of 1,3 m/s and is in operation at Linz Service GmbH on Industriezeile in the inland port of Linz, which is located on the River Danube. The conveyor carries household and industrial waste and sewage sludge from the Asten sewage treatment plant out of a treatment building and over a public street to the power plant where it is used to generate district heat and electricity for utility company Linz AG’s networks. The pipe belt conveyor bridges a difference in...

Open the catalog to page 13

All Continental Industry Contitech catalogs and technical brochures

  1. FLEXOWELL®

    8 Pages

  2. PVC Hose

    20 Pages

  3. CONTI®V FO

    1 Pages

  4. STAHLCORD®

    6 Pages

Archived catalogs

  1. STAHLCORD®

    2 Pages

  2. CONTI-V®

    1 Pages