Tubeless Sealing Ring For Continental Industrial Tubeless Tires Improved Safety And Mobility

Tire Size TSR Article description TSR Article No. TSR 6.00R9 TL (4.00) TSR 6.50R10 TL (5.00) TSR 225/75R10 TL (6.50) TSR 7.00R12 TL (5.00) TSR 250/75R12 TL (8.00) TSR 7.00R15 TL (5.50) TSR 7.50R15 TL (6.00/6.50) TSR 8.25R15 TL (6.50) TSR 225/75R15 TL (7.00) REINF. TSR 250/70R15 TL (7.00/7.50) REINF. TSR 315/70R15 TL (8.00) REINF. TSR 355/65 R/- 15 TL (9.75) REINF. Accessories Used for For rims with wide valve slot. Article description Article No. Valve slot cover plate 1732501 If valve access is difficult due to wheel offset VALVE EXTENSION 34 MM 1732054 (recommended for most TSR 6.00R9 and TSR...

Tubeless Sealing Ring Improved Safety and Mobility. The TSR is a product which enables the mounting of tubeless industrial tires on standard industrial vehicle rims, which, because of their construction, must normally be mounted with a tube and a flap. The TSR consists of a rubber ring with an integrated tire inflation valve. The rubber ring sits on the cylindrical part of the rim between the beads of the tire, and ensures an airtight interface sealing the tire chamber without the use of a tube and flap.

The Principle A rubber sealing ring is mounted inside the tire between its beads. Disadvantages of a Tube Tire Rapid deflation upon puncture Risk of valve rip-out Instant failure and increased downtime Risk of load and equipment damage Advantages of tubeless tires No sudden airloss upon puncture Equipment remains safe, mobile and productive Elimination of sudden weight transfer results in improved vehicle stability and safety Turning on the rim is not critical Low profile tires have increased durability Simplified and quicker mounting Fewer parts than a tubed tire

Mounting Steps Lubricate bead area of the tire as well as the tire interior up to the middle of sidewall. Fold the TSR in half to create a figure ’8‘, and insert one loop into tire as far as possible. Rotate TSR to match the axis of the tire. Working around the tire, press the TSR fully into position by pushing the TSR wings into the tire. It is very important to ensure that the TSR lies symmetrically inside the tire. When the TSR is positioned in the tire, lubricate the visible surface of the TSR and the bead area. Align rim such that valve slot is in line with TSR valve as shown, and let tire...

Continental Reifen Deutschland GmbH Commercial Specialty Tires ButtnerstraGe 25. 30165 Hannover T. +49 511 938-01 [email protected] www.continental-specialty-tires.com (gntinental^The Future in Motion