Series 200 Infeed Tube Support We Make the Cut, Fast and Clean! Tables and Cutter Blocks The Series 200 tube support tables were designed to be used where the complexity and expense of an automatic tube feeding system cannot be justified. They permit an operator to safely load tube stock onto and manually feed it in to the cut-off machine.  Handles a range of tube sizes with no need for adjusting: 1/4” to 3” Non-marring tube supports prevent damage to tube stock during cutting Standard storage racks included (1” tube pictured) Built-in tube indexing system - load one tube at a time for cutting Available in 10 to 25 foot long models Compatible with Model 2A, 3A, and 3H cut-off machines Available for retrofit to existing machines 10 ft. Series 200 table with Model 2A Cut-Off Machine pictured The Series 200 cutter blocks work in conjunction with the tube support tables. They provide support and alignment directly under the cut-off machine’s blade during cutting. Each cutter block handles a specific range of tube sizes and they’re easily swappable for fast change-overs.  4 size ranges available: 1/4” to 3/8”, 3/8” to 1”, 1” to 2”, and 2” to 3”. (2 to 3” size is for Model 3A/3H applications only) Each size available in camroll (short) or full support depending on application. Compatible with Model 2A, 3A, and 3H cut-off machines Available for retrofit to existing machines www.continentalcutoff.com • e-mail: [email protected] Telephone: (630) 543-