COLLECTOR® The extremely flexible hose for milk collecting trucks Marking: 2 parallel, spirally applied red stripes, interrupted by the words “COLLECTOR”, on blue cover Application: COLLECTOR® is the ideal high-quality hose for the reliable and safe use with milk collecting trucks. Its white lining made from natural rubber is absolutely neutral to taste and odour, resistent to raw milk as well as to commonly used cleaning products. The reinforcements with just one steel wire helix allow a pressure of 6 bar. The very high flexibility of the hose makes it easy to handle. The NR cover is resistent to abrasion, UV and ozone. Description: q homogeneous, smooth, white NR-lining q absolutely neutral to taste and odour q working pressure up to 6 bar q temperature range from – 40°C up to +70°C (+90°C max. 20 minutes) q reinforcements: synthetic fibres q can be steamed up to +130 °C (max. 20 minutes) q highly flexible and lightweight q NR-cover, resistant to ozone, weather and abrasion q meets the recommendation XXI of BfR and FDA Technical data: Nominal width Wall thickness Zoll/Inch mm 1 1/2 19/16 mm Working pressure* bar Minimum burst pressure* bar 38 5,5 6 18 76 1.200 40 5,5 6 18 80 1.300 1 3/4 45 5,5 6 18 90 1.400 2 50 5,5 6 18 100 1.500 2 1/8 53 5,5 6 18 106 1.600 2 1/2 63 6,0 6 18 126 2.200 2 5/8 65 7,0 6 18 140 2.500 3 75 7,0 6 18 170 3.000 4 * Inner-Ø 100 8,0 6 18 250 4.550 based on room temperatur Minimum bending radius approx. mm Weight approx. g/m Delivery in coils of 40 m Market segment industrial hoses ContiTech Schlauch GmbH Continentalstrasse 3-5 D-34497 Korbach (Germany) [email protected] www.contitech.de/ih The content of this publication is provided for information only and without responsibility. ContiTech AG’s obligations and responsibilities regarding its products are governed solely by the agreements under which they are sold. Unless otherwise agreed in writing, the information contained herein does not become part of these agreements. This publication does not contain any guarantee or agreed quality of ContiTech AG’s products or any warranty of merchantability, fitness for a particular purpose and non-infringement. ContiTech AG may make changes in the products or services described at any time without notice. This publication is provided on an ”as is” basis. To the extent permitted by law, ContiTech AG makes no warranty, express or implied, and assumes no liability in connection with the use of the information contained in this publication. ContiTech AG is not liable for any direct, indirect, incidental, consequential or punitive damages arising out of the use of this publication. Information contained herein is not intended to announce product availability anywhere in the world. © 2007 ContiTech AG. All rights reserved.