VSNG10 SOLENOID OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET • SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES CONTINENTAL HYDRAULICS

VSNG10 VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES SOLENOID OPERATED DIRECTIONAL VALVES DESCRIPTION These valves are supplied with a ZINC-NICKEL PLATING making them the perfect choice for mobile and environmental applications that require better protection. Direct acting, subplate mounted directional control valve, with mounting surface according to NFPA D05 ISO 4401-05. The valve body is made with high strength cast iron with internal passages designed to minimize pressure drop. TYPICAL PERFORMANCE SPECIFICATIONS P - A - B Ports MAXIMUM OPERATING PRESSURE FLOW RATE MOUNTING SURFACE The valve...

IDENTIFICATION CODE DESIGN LETTER MECHANICAL OMIT IF NOT REQUIRED Single Solenoid 2 Position - Spring Offset Single Solenoid Operator At ‘B’ Port End 2 Dual Solenoid 2 Position Detented (No Spring) VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES 3 Dual Solenoid 3 Position - Spring Centered 5 Single Solenoid 2 Position - Spring Centered TYPICAL ORDERING CODE: VSNG10-3A-A-D24K1-A 9 Single Solenoid 2 Position - 3 Ways Spring Offset SPOOLS NAME CENTER POSITION FUNCTION MATCHING All ports open, restricted Other spool funcions are available upon request. [email protected] - WWW.CONTINENTALHY

PRESSURE DROPS ∆P-Q VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES (OBTAINED WITH VISCOSITY OF 170 SUS - 36 CST AT 122°F - 50°C) FLOW CURVE NUMBER SPOOL PERFORMANCE CURVE DC VOLTAGE CURVE NOTES: 1. The values indicated in the graphs are relevant to the standard solenoid valve, with D24 coils. 2. Valve performance was tested in a four way circuit (full loop). Performances may be reduced from that shown when used in a three-way circuit (half circuit), i.e. A or B port plugged. 3. The values have been obtained according to ISO 6403 norm with solenoids at rated temperature and supplied with voltage...

OVERALL AND MOUNTING DIMENSIONS - DIN STYLE VERSION Dimensions in mm [IN] Manual Override Integrated in the Tube Coil Removal Space VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES Mounting surface with sealing rings:4 pcs. AS568-014 90 Shore A Solenoid position for “R” Mechanical Option Mounting surface with sealing rings:4 pcs. AS568-014 90 Shore A [email protected] - WWW.CONTINENTALHYDRAULI

COIL FEATURES VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES VOLTAGE [VOLT] The coils are fastened to the tube by a threaded nut and can be rotated 360°. SUPPLY VOLTAGE FLUCTUATION MAXIMUM SWITCH ON FREQUENCY DUTY CYCLE ELECTROMAGNETIC COMPATIBILITY (EMC) LOW VOLTAGE Coil Insulation COIL CONNECTION K1 - DIN 43650 This solenoid has three terminal posts. Use bi-polar connectors that meet ISO 4400 / DIN 43650 (EN 175301-803). Protection against atmospheric agent: IP 65* Connectors must be ordered separately. K2 - AMP JUNIOR Plug for this type of connector. Protection against atmospheric agent: IP...

SEAL KIT Buna Seal Kit NOTES: 1. Bolt kit consists of: qty. 4 1/4 - 20 UNC / qty. 4 # 1/4 lock washer 2. The recommended torque value for fasteners is: 6 lbf (8 Nm) [email protected] - WWW.CONTINENTALHYDRAULICS.COM VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES

VSNG10 - SOLENOID OPERATED DIRECTIONAL VALVES ABOUT CONTINENTAL HYDRAULICS Rugged, durable, high-performance, efficient—the reason Continental Hydraulics’ products are used in some of the most challenging applications across the globe. With a commitment to quality customer support and innovative engineering, Continental’s pumps, valves, power units, mobile and custom products deliver what the markets demand. Continental has been serving the food production, brick and block, wood products, automotive and machine tool industries since 1962. Learn how our products survive some of the most harsh environments....