VED*HL-*-KD2 HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES (IN COMPLIANCE WITH ATEX 94/4/EC) 5505 WEST 123RD STREET • SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES CONTINENTAL HYDRAULICS

CONTINENTAL c: HYDRAULICS VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES TYPICAL PERFORMANCE SPECIFICATIONS WWW.CONTINENTALHYDRAULICS.COM - [email protected]

VED03HL-D03 HAZARDOUS SIZE LOCATION Dual Solenoid 3 Position Spring Centered Single operator 2 Position Spring Centered KD2 VALVE ATEX APPROVAL For gases, vapors, mists: EX II 2G IIC T4 Gb For dust: EX II 2D IIIC T 154°C Db (protection type of the coil "d") MECHANICAL OPTIONS OMIT IF NOT REQUIRED - DESIGN LETTER SOLENOIDS see codes on page 20 TEMPERATURE CLASS NOMINAL FLOW (with Dp P-T 143 psi) TERMINAL BLOCK CONNECT TYPICAL ORDERING CODE: VED03HL-3AC-26-AT03-KD2-12D-A NOTE: The Zinc-Nickel body finishing surface treatment ensures a salt spray resistance up to 600 h (test operated according to...

VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES PERFORMANCE CURVES FOR AC SPOOL Curves obtained with mineral oil viscosity of 170 sus (36 cSt) at 122°F (50°C); the Dp values are measured between P and T (full loop) valve ports. FLOW CHARACTERISTICS FLOW CHARACTERISTICS OPERATING LIMITS OPERATING LIMITS NOTES: Curves obtained with VED03HL 24V version. WWW.CONTINENTALHYDRAULICS.COM - [email protected]

Curves obtained with mineral oil viscosity of 170 sus (36 cSt) at 122°F (50°C); the Dp values are measured between P and T (full loop) valve ports. FLOW CHARACTERISTICS FLOW CHARACTERISTICS OPERATING LIMITS VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES PERFORMANCE CURVES FOR AC SPOOL OPERATING LIMITS NOTES: Curves obtained with VED03HL 24V version. [email protected] - WWW.CONTINENTALHYDRAULICS.COM

VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES PERFORMANCE CURVES FOR FC SPOOL Curves obtained with mineral oil viscosity of 170 sus (36 cSt) at 122°F (50°C); the Dp values are measured between P and T (full loop) valve ports. FLOW CHARACTERISTICS FLOW CHARACTERISTICS OPERATING LIMITS OPERATING LIMITS NOTES: Curves obtained with VED03HL 24V version. WWW.CONTINENTALHYDRAULICS.COM - [email protected]

CONTINENTAL ET HYDRAULICS PERFORMANCE CURVES FOR FC SPOOL Curves obtained with mineral oil viscosity of 170 sus (36 cSt) at 122°F (50°C); the Dp values are measured between P and T (full loop) valve ports. FC-16 FC-26 VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES NOTES: Curves obtained with VED03HL 24V version. RESPONSE TIME [email protected] - WWW.CONTINENTALHYDRAULICS.COM

VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES OVERALL AND MOUNTING DIMENSIONS THREAD OF MOUNTING HOLE 10-24 UNC-2B - 0.50 FASTENING 4 bolts - 10-24 UNC-3A X 1 1/4 TIGHTENING TORQUE 4-5 lbf-ft (5.5-6.8 Nm) SEALING RINGS 4 O-rings AS568-012 90 Shore A VED03HL-3*-T* Manual override boot (STD) Cable gland to be ordered separately Coil Removal Space Mounting surface with sealing rings: 4 pcs. AS568-012 90 Shore A VED03HL-5*-S* Solenoid position for “R”Mechanical Option Side connection shape Cable gland to be ordered separately Mounting surface with sealing rings:4...

IDENTIFICATION CODE - HAZARDOUS LOCATION - PILOT OPERATED VEDIHL- HAZARDOUS LOCATION DESIGN LETTER VALVE ATEX APPROVAL For gases, vapors, mists: EX II 2G IIC T4 Gb For dust: EX II 2D IIIC T 154°C Db (protection type of the coil "d") SOLENOIDS see codes on page 20 MECHANICAL OPTIONS OMIT IF NOT REQUIRED INTERNAL PILOT OPTIONS TEMPERATURE CLASS Dual Solenoid 3 Position Spring Centered Single operator 2 Position Spring Centered NOMINAL FLOW (with Dp P-T 145 psi) PILOT / DRAIN TERMINAL BLOCK CONNECT TYPICAL ORDERING CODE: VED07HL-3AC-150-A2T03-KD2-24D-A NOTE: The valve is supplied with STD surface...

CONTINENTAL c: HYDRAULICS VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES PERFORMANCE CURVES - FLOW GAIN 1. Curves obtained with mineral oil viscosity of 170 sus (36 cSt) at 122°F (50°C) and VED*HL at 24V with external amplifier. 2. The Dp values are measured between P and T (full loop) valve ports. 3. Typical flow rate curves at constant Dp related to the reference signal and measured for the available spools. VED05*HL VED07HL RESPONSE TIME RESPONSE TIME VED05*HL

1. Curves obtained with mineral oil viscosity of 170 sus (36 cSt) at 122°F (50°C) and VED*HL at 24V with external amplifier. 2. The Dp values are measured between P and T (full loop) valve ports. 3. Typical flow rate curves at constant Dp related to the reference signal and measured for the available spools. VED08HL VED10HL AC-200/FC-200 AC-350/FC-350 VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES RESPONSE TIME RESPONSE TIME VED08HL [email protected] - WWW.CONTINENTALHYDRAULICS.COM

VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES OVERALL AND MOUNTING DIMENSIONS FOR VED05*HL Dimensions in mm [IN] THREAD OF MOUNTING HOLE 1/4 - 20 UNC-2B x 0.60 FASTENING 4 bolts - 1/4 - 20 UNC-3A X 1 1/2 TIGHTENING TORQUE 6 lbf-ft (8 Nm) SEALING RINGS 5 O-rings AS568-014 90 Shore A 2 O-rings AS568-012 90 Shore A Manual override boot (STD) Coil Removal Space Cable gland to be ordered separately SOL. ‘B’ Mounting surface with sealing rings VED05*HL-5*-*S* Solenoid position for “R” Mechanical Option Cable gland to be ordered separately WWW.CONTINENTALHYDRAULICS.COM...

Manual override boot (STD) Coil Removal Space Cable gland to be ordered separately SOL. ‘A’ VED*HL-*-KD2 - HAZARDOUS LOCATION, PROPORTIONAL, DIRECT & PILOT OPERATED VALVES OVERALL AND MOUNTING DIMENSIONS FOR VED07HL Mounting surface with sealing rings VED07HL-5*-*S* Solenoid position for “R” Mechanical Option Side connection shape Cable gland to be ordered separately [email protected] - WWW.CONTINENTALHYDRAULIC