VAD03M-VPD03M- VMD03M
10Pages

AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES 5505 WEST 123RD STREET • SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD03M-VPD03M-VMD03M - AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES CONTINENTAL HYDRAULICS

VAD03M-VPD03M-VMD03M - AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES VAD03M-VPD03M-VMD03M AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES Continental Hydraulics offers directional control valves with air pilot actuation, hydraulic pilot actuation and lever actuation. These valves conform to NFPA D03 and ISO 4401 mounting standards. They are available in both 3 way and 4 way styles. All versions are available in 2 position spring offset, 2 position detent, 2 position spring centered and 3 position spring centered versions. The lever valve also is available in a 3 position detent model....

IDENTIFICATION CODE DESIGN LETTER FUNCTION FOR LEVER OPERATOR MECHANICAL OMIT IF NOT REQUIRED Lever Operator 2 Position Spring Offset Operator at ‘B’ port end. Available only with function 1, 5 and 9. Also available on lever valve codes 3 and 4. Lever operator rotated 90° toward tank port. Spool Type See Next Page VAD03M-VPD03M-VMD03M - AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES Lever Operator 2 Offset Position Detented (No Spring) 1 Single Operator 2 Position Spring Offset 3 Lever Operator 3 Position Spring Centered 2 Dual Operator 2 Position Detented (No Spring) 4 Lever Operator 3...

VAD03M-VPD03M-VMD03M - AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES SPOOLS NAME CENTER POSITION FUNCTION MATCHING All ports blocked or P and A blocked and B→T All ports blocked or A blocked and B→T restricted All ports open, restricted P→B and A blocked or all ports blocked P and B blocked and A→T or all ports blocked P blocked and A→T restricted or all ports blocked All ports open, restricted All ports blocked, or P→A B and T blocked All ports open, restricted NOTES: 1. Functions marked with * are available with lever operator only. 2. AN and AJ spools are not available with lever...

PRESSURE DROPS ∆P-Q (OBTAINED WITH VISCOSITY OF 36 CST AT 50 °C) SHIFTED VAD03M-VPD03M-VMD03M - AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES FLOW CURVE NUMBER PERFORMANCE CURVE VAD03M, VMD03M CURVE NOTES: 1. Valve performance was tested in a four way circuit (full loop). Performances may be reduced from that shown when used in a three-way circuit (half circuit), i.e. A or B port plugged. 2. The values have been obtained according to ISO 6403 norm with filtration according to ISO 4406:1999 class 18/16/13. SALES@CONTHYD.COM - WWW.CONTINENTALHYDRAULICS.COM

OVERALL AND MOUNTING DIMENSIONS FOR PNEUMATIC

OVERALL AND MOUNTING DIMENSIONS FOR LEVER OPERATED VALVE surface with sealing rings: On 2- position valves push only to shift the valve. the lever can be oriented by the user directly 180° turned to the standard position by uscrewing the lever and re-mounting it in the desired position. On 3- position valves, pulling the lever obtains the right position, pushing the lever obtains the left position. Lever operator at'B' Portend (not available with function 2 and 25)

VAD03M-VPD03M-VMD03M - AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES APPLICATION DATA FLUIDS All pressure drops shown on these data pages are based on 170 SUS fluid viscosity and 0.87 specific gravity. For any other specific gravity (G1) the pressure drop (∆P) will be approx. ∆P1 = ∆P (G1/G). See the chart for other viscosities. FLUID VISCOSITIES Use mineral oil-based hydraulic fluids HL or HM type, according to ISO 6743-4. For these fluids, use NBR seals. For fluids HFDR type (phosphate esters) use FPM seals (code G). For the use of other kinds of fluid such as HFA, HFB, HFC, please...

Valve only SUBPLATES REAR PORTED SIDE PORTED VAD03M-VPD03M-VMD03M - AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES NOTES: 1. Max pressure for aluminum subplates: 3000 psi (210 bar) 2. Max pressure for ductile subplates: 5000 psi (350 bar) 3. Always verify subplate port size is proper for the application SALES@CONTHYD.COM - WWW.CONTINENTALHYDRAULICS.COM

VAD03M-VPD03M-VMD03M - AIR, HYDRAULIC, LEVER OPERATED DIRECTIONAL VALVES ABOUT CONTINENTAL HYDRAULICS Rugged, durable, high-performance, efficient—the reason Continental Hydraulics’ products are used in some of the most challenging applications across the globe. With a commitment to quality customer support and innovative engineering, Continental’s pumps, valves, power units, mobile and custom products deliver what the markets demand. Continental has been serving the food production, brick and block, wood products, automotive and machine tool industries since 1962. Learn how our products...