*mydirectindustry

PVER

Product catalog summary

Introduction
The document provides technical specifications and installation guidelines for the PVER series vane pumps by Continental Hydraulics. These pumps are designed for variable displacement with direct spring pressure regulation, suitable for various industrial applications.

Specifications
The PVER vane pumps are available in four sizes with displacements ranging from 0.403 to 1.35 in³/rev (6.6 to 22.2 cm³/rev) and can operate at pressures up to 1000 PSI (70 bar). The pumps feature pressure-balanced thrust plates to maintain volumetric efficiency and reduce wear.

Noise Levels
Noise levels were measured at an axial distance of 1 meter in a semi-anechoic room. Values are reduced by 5 dB(A) in a completely anechoic room. For example, the PVER-3B model has noise levels of 61 dB(A) at null displacement and 63 dB(A) at full displacement.

Installation Guidelines
The pumps can be installed in any orientation, with specific requirements for the suction line to ensure proper oil flow. The drainage port should connect directly to the tank, and the motor-pump connection must use a flexible coupling to avoid axial or radial loads.

Performance and Operation
The pumps operate at speeds between 800 to 1800 RPM with a clockwise rotation. They are designed to maintain constant circuit pressure by compensating for system leakage during zero flow demand conditions.

Ordering and Identification
The document includes a typical ordering code and identification guide, detailing options for seals, rotation, ports, pressure range, and flow rate.

Performance Curves
Performance curves for flow versus pressure and drain flow rate are provided for different pump models, illustrating their operational characteristics under various conditions.

Dimensions
Overall and mounting dimensions are specified in millimeters and inches, with details on port sizes and types, including BSPP threading for hydraulic connections.

About Continental Hydraulics
Continental Hydraulics is known for producing rugged and efficient hydraulic products since 1962, serving industries such as food production, automotive, and machine tools.

Catalog excerpts

PVER VANE PUMPS 5505 WEST 123RD STREET • SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PVER VANE PUMPS CONTINENTAL HYDRAULICS

Open the catalog to page 1

CONTINENTAL c: HYDRAULICS PVER VANE PUMPS PVER PUMPS FEATURES AND BENEFITS The PVER series vane pumps are variable displacement vane pumps with direct spring pressure regulation. - The pressure regulator adjustable load spring keeps the pump group cam ring in eccentric position. When the outlet pressure equals the pressure corresponding to the spring setting, the cam ring is moved so to reduce the displacement, adjusting the flow rate to the values required by the system. In zero flow demand conditions, the pump delivers oil only to compensate for any system leakage, keeping the circuit pressure...

Open the catalog to page 2

PVER PUMPSVANE PUMPS PVER VANE PUMPS DESCRIPTION The PVER pumps are variable displacement vane pumps with direct pressure regulator governor spring for fast on/off response. The pump group is complete with hydrostatic axial compensation distribution plates that improve the volumetric efficiency and reduce wear of the components. The pressure regulator adjustable load spring keeps the pump group cam ring in eccentric position. When the delivery pressure equals the pressure corresponding to the spring setting, the cam ring is moved so to reduce the displacement, adjusting the flow rate to the values...

Open the catalog to page 3

IDENTIFICATION CODE DESIGN LETTER PVER VANE PUMPS FLOW RATE @ 1800 RPM PRESSURE RANGE TYPICAL ORDERING CODE: PVER-10B10-RF-O-1N-B

Open the catalog to page 4

PERFORMANCE CURVES FLOW vs PRESSURE PVER-3B10 PVER VANE PUMPS [email protected] - WWW.CONTINENTALHYDRAULICS.COM

Open the catalog to page 5

PVER VANE PUMPS PERFORMANCE CURVES DRAIN FLOW RATE PVER-3B WWW.CONTINENTALHYDRAULICS.COM - [email protected]

Open the catalog to page 6

OVERALL AND MOUNTING DIMENSIONS PVER-3B Pressure compensator. Clockwise rotation to higher pressure. Suction port: 3/8” BSPP (parallel) Delivery port: 3/8” BSPP (parallel) PVER VANE PUMPS Case drainage port: 1/4” BSPP (parallel) SAE J744 ﬁtting ﬂange 2 holes PVER-5B Pressure compensator. Clockwise rotation to higher pressure. Case drainage port: 1/4” BSPP (parallel) Suction port: 1/2” BSPP (parallel) Delivery port: 3/8” BSPP (parallel) SAE J744 ﬁtting ﬂange 2 holes [email protected] - WWW.CONTINENTAL

Open the catalog to page 7

OVERALL AND MOUNTING DIMENSIONS LPV SERIES AXIAL PISTON PUMPS Pressure compensator. Clockwise rotation to higher pressure. Case drainage port: 1/4” BSPP (parallel) Suction port: 3/4” BSPP (parallel) Delivery port: 1/2” BSPP (parallel) 4 holes Ø11 threaded: 2 x M12 Volume adjustment. Clockwise rotation to reduce ﬂow. WWW.CONTINENTALHYDRAULICS.COM - SALES@CONTH

Open the catalog to page 8

PVER VANE PUMPS [email protected] - WWW.CONTINENTALHYDRAULICS.COM

Open the catalog to page 9

PVER VANE PUMPS ABOUT CONTINENTAL HYDRAULICS Rugged, durable, high-performance, efﬁcient—the reason Continental Hydraulics’ products are used in some of the most challenging applications across the globe. With a commitment to quality customer support and innovative engineering, Continental’s pumps, valves, power units, mobile and custom products deliver what the markets demand. Continental has been serving the food production, brick and block, wood products, automotive and machine tool industries since 1962. Learn how our products survive some of the most harsh environments. [email protected]...

Open the catalog to page 10

PVER

PVER

Catalog excerpts

All CONTINENTAL HYDRAULICS catalogs and technical brochures

Archived catalogs