*mydirectindustry

PVER VANE PUMPS

Product catalog summary

Introduction
The document provides technical specifications and installation guidelines for the PVER series vane pumps by Continental Hydraulics. These pumps are designed for variable displacement with direct spring pressure regulation, suitable for various industrial applications.

Specifications
The PVER vane pumps are available in four sizes with displacements ranging from 0.403 to 1.35 in³/rev (6.6 to 22.2 cm³/rev) and can operate at pressures up to 1000 PSI (70 bar). The pumps feature pressure-balanced thrust plates to maintain volumetric efficiency and reduce wear. They operate at speeds between 800 to 1800 RPM and are designed for clockwise rotation.

Noise Levels
Noise levels were measured at an axial distance of 1 meter in a semi-anechoic room. The noise levels for different models are as follows:

PVER-3B: 61-63 dB(A)
PVER-5B: 62-65 dB(A)
PVER-7B: 64-68 dB(A)
PVER-10B: 64-70 dB(A)

These values should be reduced by 5 dB(A) for a completely anechoic room.

Installation Guidelines
The pumps can be installed in any orientation, but the suction line must be appropriately sized to ensure proper oil flow. The drainage port should connect directly to the tank, separate from other discharges, to prevent foam formation. A flexible coupling is recommended for motor-pump connections to avoid axial or radial loads on the pump shaft.

Performance and Ordering
The document includes performance curves for flow versus pressure and drain flow rate. The typical ordering code for the pumps includes specifications for seals, rotation, ports, pressure range, and flow rate.

Company Overview
Continental Hydraulics is known for producing rugged, durable, and efficient hydraulic products since 1962, serving industries such as food production, automotive, and machine tools.

Conclusion
The PVER series vane pumps are designed for high performance and efficiency, suitable for demanding industrial applications. The document provides comprehensive details on specifications, installation, and performance to assist in selecting and utilizing these pumps effectively.

Catalog excerpts

PVER VANE PUMPS 5505 WEST 123RD STREET • SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PVER VANE PUMPS CONTINENTAL HYDRAULICS

Open the catalog to page 1

PVER PUMPS PVER VANE PUMPS FEATURES AND BENEFITS The PVER series vane pumps are variable displacement vane pumps with direct spring pressure regulation. - The pressure regulator adjustable load spring keeps the pump group cam ring in eccentric position. When the outlet pressure equals the pressure corresponding to the spring setting, the cam ring is moved so to reduce the displacement, adjusting the ﬂow rate to the values required by the system. In zero ﬂow demand conditions, the pump delivers oil only to compensate for any system leakage, keeping the circuit pressure constant. - Available in...

Open the catalog to page 2

PVER PUMPS VANE PUMPS PVER VANE PUMPS DESCRIPTION The PVER pumps are variable displacement vane pumps with direct pressure regulator governor spring for fast on/off response. The pump group is complete with hydrostatic axial compensation distribution plates that improve the volumetric efﬁciency and reduce wear of the components. The pressure regulator adjustable load spring keeps the pump group cam ring in eccentric position. When the delivery pressure equals the pressure corresponding to the spring setting, the cam ring is moved so to reduce the displacement, adjusting the ﬂow rate to the values...

Open the catalog to page 3

IDENTIFICATION CODE PVER VANE PUMPS CLOCKWISE ROTATION TYPICAL ORDERING CODE: PVER-10B10-RF-O-1N-B DESIGN LETTER PRESSURE RANGE FLOW RATE @ 1800 RPM CODE WWW.CONTINENTALHYDRAULICS.COM - [email protected] BSPP (British Standard Pipe Parallel) threading hydraulic connection

Open the catalog to page 4

PERFORMANCE CURVES FLOW vs PRESSURE PVER-3B10 PVER VANE PUMPS [email protected] - WWW.CONTINENTALHYDRAULICS.COM

Open the catalog to page 5

PVER VANE PUMPS PERFORMANCE CURVES DRAIN FLOW RATE PVER-3B WWW.CONTINENTALHYDRAULICS.COM - [email protected]

Open the catalog to page 6

OVERALL AND MOUNTING DIMENSIONS PVER-3B Pressure compensator. Clockwise rotation to higher pressure. Suction port: 3/8” BSPP (parallel) Delivery port: 3/8” BSPP (parallel) PVER VANE PUMPS Case drainage port: 1/4” BSPP (parallel) SAE J744 ﬁtting ﬂange 2 holes PVER-5B Pressure compensator. Clockwise rotation to higher pressure. Case drainage port: 1/4” BSPP (parallel) Suction port: 1/2” BSPP (parallel) Delivery port: 3/8” BSPP (parallel) SAE J744 ﬁtting ﬂange 2 holes [email protected] - WWW.CONTINENTAL

Open the catalog to page 7

OVERALL AND MOUNTING DIMENSIONS LPV SERIES AXIAL PISTON PUMPS Pressure compensator. Clockwise rotation to higher pressure. Case drainage port: 1/4” BSPP (parallel) Suction port: 3/4” BSPP (parallel) Delivery port: 1/2” BSPP (parallel) 4 holes Ø11 threaded: 2 x M12 Volume adjustment. Clockwise rotation to reduce ﬂow. WWW.CONTINENTALHYDRAULICS.COM - SALES@CONTH

Open the catalog to page 8

PVER VANE PUMPS ABOUT CONTINENTAL HYDRAULICS Rugged, durable, high-performance, efﬁcient—the reason Continental Hydraulics’ products are used in some of the most challenging applications across the globe. With a commitment to quality customer support and innovative engineering, Continental’s pumps, valves, power units, mobile and custom products deliver what the markets demand. Continental has been serving the food production, brick and block, wood products, automotive and machine tool industries since 1962. Learn how our products survive some of the most harsh environments. [email protected]...

Open the catalog to page 10

PVER VANE PUMPS

PVER VANE PUMPS

Catalog excerpts

All CONTINENTAL HYDRAULICS catalogs and technical brochures

Archived catalogs