Standard Type
10Pages

Standard Type Rupture Disc To assure selection of the correct rupture disc and holder for your application, please determine the following: Rupture Disc: Quantity Size Description: Standard Rupture Disc Material: Rated Burst Pressure: psig or barg @ °F or °C Manufacturing range: (See Table III) Burst Tolerance: (See Table III) Manufacturing number: (if replacing current Continental rupture disc installed) Seating Configuration: (30° Light Lip, 30° Heavy Lip) See Table II. Options: • ASME testing required ( Stamp) • Liner, Coating • Protective rings • Vacuum / Backpressure Support (if required) • Gaskets • B.D.I. Alarm System Holder: Bolting Class (ASME, DIN, JIS): Quantity: Size: Material: Inlet Outlet Configuration: (for Screw Type and Union Type Holders) Inlet Outlet Accessories: (for Insert Type and Full Bolted Holders) • Gauge Tap • Nipple and Tee • Excess Flow Valve • Pressure Gauge • Special Facing • Teflon Coating Other Requirements: ASME Code Symbol Stamp Available When Specified China Manufacture License Available When Specified Pressure Equipment Directive Available When Specified Continental Disc Corporation has representatives located throughout the world. Contact the C.D.C. office nearest you for the authorized representative in your area. OTHER SPECIFICATIONS Operating Specifications: 1. Maximum allowable working pressure (M.A.W.P.) 2 Operating pressure 3. Operating temperature 4. Actual vacuum / backpressure 5. Cycle conditions 6. Required flow rate 7. Media 8. Molecular weight / specific gravity 1. Code: ASME, ISO, DIN, EN, JIS, BSI or other 2. Special cleaning 3. Special packaging 4. Special tagging 5. Temperature testing 6. Material test reports 7. Other CORPORATE HEADQUARTERS Quality Assurance / Documentation: Continental Disc Corporation 3160 W. Heartland Drive Liberty, Missouri 64068-3385 USA Phone: FAX: E-mail: Website: Continental Disc Corporation Energieweg 20 2382 NJ Zoeterwoude-Rijndijk The Netherlands Continental Disc Corporation Room 910, Tower B, COFCO Plaza No. 8 JianGuoMenNei Avenue Beijing (100005), P.R. China Groth Continental Mfg. Pvt. Ltd. Survey No. 423/P, Mahagujarat Industrial Estate, Moraiya, Sarkhej-Bavla Road, Ahmedabad 382213, INDIA Phone: Fax: Mobile: E-mail: Continental Disc Corporation reserves the right to alter the information in this publication without notice. Reproduction without written permission prohibited. © 2010 Continental Disc Corporation

STANDARD TYPE RUPTURE DISC What is a Standard Type Rupture Disc? Continental Disc Corporation's Standard Rupture Disc is a solid metal, differential pressure relief device that provides instantaneous overpressure protection for systems, equipment and vessels. The Standard Rupture Disc provides a full-opening design that responds within milliseconds to potentially damaging overpressure accumulation, permitting its use in a variety of protection applications. The Standard Rupture Disc features: • Availability of a wide range of sizes, materials and burst pressure ratings for use in numerous...

CONTINENTAL DISC HOLDERS Continental's Standard Rupture Discs are engineered for use in customized holder configurations as well as various standard designs. STANDARD TYPE RUPTURE DISC are available in the 1/2" and 1" sizes. The 1-1/2" and 2" sizes feature burst pressures up to 4,000 psig (276 barg). All Union Type Holders are available with threaded or welded inlets in combination with threaded, welded or muffled outlets. Available materials include Carbon Steel and 300 Series Stainless Steel. Special designs are available on request. Refer to C.D.C. Bulletin 2-3308-2 for details. Screw...

SPECIFICATIONS Manufacturing Range Manufacturing range is defined as the allowable pressure range within which a rupture disc is rated. It is based upon the customer specified burst pressure. The manufacturing ranges for Continental's Standard Rupture Discs are outlined in Table III. Special reduced manufacturing ranges are available on request including 25%, 50% and 75% of the standard range. Please consult your C.D.C. representative or the factory for additional information. Burst Tolerance In accordance with ASME Code, a tolerance is applied to the rated or stamped burst pressure of a...

SPECIFICATIONS Manufacturing Range Burst Tolerance Manufacturing range is defined as the allowable pressure range within which a rupture disc is rated. It is based upon the customer specified burst pressure. The manufacturing ranges for Continental's Standard Rupture Discs are outlined in Table III. Special reduced manufacturing ranges are available on request including 25%, 50% and 75% of the standard range. Please consult your C.D.C. representative or the factory for additional information. In accordance with ASME Code, a tolerance is applied to the rated or stamped burst pressure of a...

CONTINENTAL DISC HOLDERS Continental's Standard Rupture Discs are engineered for use in customized holder configurations as well as various standard designs. STANDARD TYPE RUPTURE DISC Screw Type Holders* are available in the 1/2" and 1" sizes. The 1-1/2" and 2" sizes feature burst pressures up to 4,000 psig (276 barg). All Union Type Holders are available with threaded or welded inlets in combination with threaded, welded or muffled outlets. Available materials include Carbon Steel and 300 Series Stainless Steel. Special designs are available on request. Refer to C.D.C. Bulletin 2-3308-2...

STANDARD TYPE RUPTURE DISC What is a Standard Type Rupture Disc? Continental Disc Corporation's Standard Rupture Disc is a solid metal, differential pressure relief device that provides instantaneous overpressure protection for systems, equipment and vessels. The Standard Rupture Disc provides a full-opening design that responds within milliseconds to potentially damaging overpressure accumulation, permitting its use in a variety of protection applications. The Standard Rupture Disc features: • Availability of a wide range of sizes, materials and burst pressure ratings for use in numerous...