ENVIRO-SEAL™ Rupture Disc
14Pages

{{requestButtons}}

Catalog excerpts

ENVIRO-SEAL™ Rupture Disc - 2

What is a Composite Type Patented Seven-Hole Recommended Rupture Disc? Design Operating Conditions > AComposite Type Rupture Disc is adifferential pressure relief device used to protect pressurized systems, equipment, and vessels from a potentially damaging overpressure condition. Continental's Composite Rupture Discs are designed to provide instantaneous, full-opening pressure relief.Continental Disc offers twoComposite Type rupture disc design styles, a preformed style, like the CDC or PLV Rupture Disc; and a flat style, like C.D.C.'s ENVIRO-SEALRupture Disc. Continental's Preformed...

Open the catalog to page 2
ENVIRO-SEAL™ Rupture Disc - 3

Each application has its own uniqueoperating characteristics. Many variables such as pulsations, cycling, and oper- ating-to-burst-pressure ratio must be considered in order to achieve maximum service life from the rupture disc.Versatile operating characteristics,along with numerous customizable options like protective liners, protective rings, vacuum or backpressure support, gaskets, and Continental's exclusive B.D.I. > Protective rings may be used onrupture discs made of thin materials or where delicate seals are used. These rings provide rigidity for easier handling and also help protect...

Open the catalog to page 3
ENVIRO-SEAL™ Rupture Disc - 4

Continental Disc manufacturesseveral Preformed Composite RuptureDiscs to fit numerous applications. > The CDCV Type Rupture Disc is thesame design as the CDC Type Rupture Disc, with the addition of a vacuum support installed on the process side of the seal. This design provides process side corrosion protection and support for full vacuum conditions. The PLType Rupture Disc is similarto the CDC type, with the addition of a corrosion resistant Teflon liner placed on the outlet side of the top section.The PLV Type Rupture Disc is thesame design as the PLType Rupture Disc, but with the...

Open the catalog to page 4
ENVIRO-SEAL™ Rupture Disc - 5

Temperature Rating MaterialsѰFCAluminum / Silver260127 Nickel / Monel > Ю *800427316SS900482 Inconel > *1000538FEPTeflon Seal or Lining400204 TFE or PFASeal or Lining500260 > *Monel and Inconel are registered trademarks of the Inco family of companies. >

Open the catalog to page 5
ENVIRO-SEAL™ Rupture Disc - 8

In addition to the PreformedComposite Rupture Disc, Continental Disc also manufactures a flat composite rupture disc design, the ENVIRO-SEAL Rupture Disc. The ENVIRO-SEAL Rupture Disc is designed to provide economical protection for low pressure atmospheric storage vessels and to isolate the downstream side of pressure relief valves and other equipment from corrosive environments. > Continental Disc manufactures threetypes of ENVIRO-SEALRupture Discs to fit various applications. > The ENVIRO-SEALType III RuptureDisc is also designed to burst in either the positive or vacuum direction at the...

Open the catalog to page 8
ENVIRO-SEAL™ Rupture Disc - 10

Continental Disc Corporation'sPreformed Composite Rupture Discs are engineered for use in customized holder configurations as well as various standard designs. > The Full Bolted Style Holder isavailable for ANSI, DIN, or JIS class flanges. Full Bolted holders for Preformed Composite Rupture Discs are available in sizes ranging from 1" through 24" (25mm to 600mm) in the 30 angular seating configuration. Standard materials include Carbon Steel and 304 or 316 Stainless Steel. Special materials are available upon request. For additional information on other sizes or flange classes, please...

Open the catalog to page 10
ENVIRO-SEAL™ Rupture Disc - 13

ENVIRO-SEALRupture Disc: Holder: Quantity:Size:Material: InletOutlet Configuration: (for Screw Type and Union Type Holders)InletOutletThreaded Connection SizeAccessories: (for Insert Type and Full Bolted Holders) Gauge TapՕ Pressure Gauge Nipple and TeeՕ Special Facing: Inlet Outlet Excess Flow ValveՕ Teflon Coating Quantity:Size:Description: ENVIRO-SEALType I, II, or III Rated Burst Pressure: Min / Max/psig or barg @F or аC (Manufacturing range and burst tolerance are included in the burst pressure min / max range) Manufacturing number: (if replacing current Continental rupture disc...

Open the catalog to page 13

All Continental Disc Corp. catalogs and technical brochures

  1. B.D.I.®

    8 Pages

  2. BDI-FLX ™

    8 Pages

  3. CERTIFLOW®

    4 Pages

  4. BDI-FLX

    8 Pages

  5. HPX

    24 Pages

  6. Standard Type

    10 Pages

  7. V R D

    8 Pages

  8. Union Holder

    2 Pages

  9. CERTIFLOW ®

    4 Pages

Archived catalogs

  1. VENT PANELS

    12 Pages