*mydirectindustry

Catalogs
Continental Disc Corp.
CFR & CFS Vent Panels

CFR & CFS Vent Panels

Product catalog summary

Introduction
Continental Disc Corporation introduces the CFR and CFS Vent Panels, designed for overpressure protection in equipment like dust collectors and silos. These panels provide immediate opening to prevent damage from gas expansions due to deflagration.

Features

Operating ratio up to 80% of minimum tagged rating.
Withstands up to 1-1/2 psig vacuum.
Non-fragmenting design with burst tolerance of ±25% for ratings up to 2 psig and ±0.5 psig for ratings above 2 psig.
Excellent cyclic service capabilities and full instantaneous opening.
Interchangeable with existing applications and available with B.D.I.® Alarm System.

Specifications
The panels are made of 316 stainless steel with TFE Teflon® seal and support burst pressures from 1.0 to 10 psig. The recommended operating pressure is 80% of the burst rating minus tolerance.

Gaskets
Available materials include black neoprene, silicone rubber, white FDA-grade rubber, and fiberglass rope, with temperature limits specified in Table II.

Vent Area and Framing
Vent panel framing is available in various materials, with dimensions provided in Table III. The panels are designed for easy mounting using bolting or welding.

Contact Information
Continental Disc Corporation has offices in the USA, Netherlands, Germany, UK, China, and Dubai, with contact details provided for each location.

Catalog excerpts

CFR and CFS Vent Panel Features include: > Operating ratio up to 80% of minimum tagged rating > Withstands 1-1/2 psig (0,104 barg) vacuum (consult factoryfor vacuum requirements exceeding 1-1/2 psig) > Burst tolerance ձ25% for ratings up to 2 psig (0,14 barg) and 0.5 psig (0,035 barg) for ratings above 2 psig (0,14 barg) > Excellent cyclic service capabilities (pressures going from positive to negative or negative to positive) > Full instantaneous opening > Fully opens under dynamic or static pressure conditions > INTERCHANGEABLE with existing vent panel applications > Available with Continental Disc Corporations patented B.D.I. > Ү (Burst Disc Indicator) Alarm System (Refer to Bulletin #5-7701-5 for specification details) > *Deflagration as defined under NFPA-68 is: Burning which takes place at a flame speed below the velocity of sound in the unburned media.Ӕ Vent panels are not generally suitable for protection against pressure or shock waves produced from detonation of dust, gases, mists, or explosives.Detonation as defined by NFPA-68 is: Burning which takes place at a flame speed above the velocity of sound in the unburned media.Ӕ size="-1">

Open the catalog to page 1

tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:5.00pt "Arial", sans-serif; } .font2 { font:6.00pt "Arial", sans-serif; } .font3 { font:7.00pt "Arial", sans-serif; } .font4 { font:8.00pt "Arial", sans-serif; } .font5 { font:9.00pt "Arial", sans-serif; } .font6 { font:11.00pt "Arial", sans-serif; } .font7 { font:15.00pt "Arial", sans-serif; } and CFS Specificatior Square and Rectang Both the CFR and CFS composite vent panels have a standard material construction of 316 stainless steel top section, TFE Teflon®* seal and 316 stainless...

Open the catalog to page 2

All Continental Disc Corp. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list