BAS Portable Router data SHEET BAS Portable Router — BACnet® Multi-Network Router The BAS Portable Router provides stand-alone routing between BACnet networks such as BACnet/IP, BACnet Ethernet, and BACnet MS/TP — thereby allowing the system integrator to mix BACnet network technologies within a single BACnet internetwork. There are two physical communication ports on the BAS Portable Router. One is a 10/100 Mbps Ethernet port and the other an isolated MS/TP port. Configuration is accomplished via a web page. Versatile Routing Between … • BACnet/IP and BACnet MS/TP • BACnet Ethernet and BACnet MS/TP • BACnet/IP and BACnet Ethernet • BACnet/IP and BACnet Ethernet and BACnet MS/TP IP Network Support • Web server for commissioning and troubleshooting • Communication diagnostic web page Flexible Communications • 10/100 Mbps Ethernet with auto-negotiation and Auto-MDIX • Optically isolated MS/TP port • MS/TP baud rates range from 9.6–76.8 kbps Convenient Installation • Powered via a USB port in a laptop • Compact plastic case can be easily stored BASautomation tm DS-BASRTPB0-BA1

Data Sheet — BAS Portable Router BAS Portable Router — BACnet® Multi-Network Router The BAS Portable Router is housed in a plastic case that is powered from a USB port on a laptop computer. There is one MS/TP port and one 10/100 Mbps Ethernet port. Through auto-negotiation and Auto-MDIX, it automatically matches connections to the attached equipment. Therefore, either straight-through or crossover CAT5 cable can be used for hook-up. The MS/TP port offers an optically-isolated transceiver. It has a removable 3-pin terminal block for the EIA-485 connection. Logically, 255 devices can be addressed....

Data Sheet — BAS Portable Router Displays a log of events in order to facilitate troubleshooting. Use this information when discussing any routing issues with Contemporary Controls technical support. BACnet/Ethemet Outgoing PukHs-l

Data Sheet — BAS Portable Router BAS Portable Router Parameter Settings Device Parameters Default Value Description Device Name BASRT-Bxxxxxx The unique default value ends with the last 6 characters of the unit’s Ethernet MAC address. You can edit it to be up to 20 characters. Device Instance 0 The router device instance is a 22-bit decimal value (0–4,194,303). Each BACnet device has a unique device instance. BACnet Ethernet Parameter Default Value Description BACnet Ethernet Network 0 BACnet/IP Parameters 16-bit decimal value (1–65534). Each BACnet network, regardless of technology, must have...

Data Sheet — BAS Portable Router BACnet Protocol Implementation Conformance (PIC) Statement Portable BAS Router Portable BACnet Commissioning Tool BACnet Protocol Implementation Conformance Statement (Annex A) Date: 21 February 2012 Vendor Name: Contemporary Controls Product Name: Portable BAS Router Product Model Number: BASRTP-B Applications Software Version: Firmware Revision: 2.0 BACnet Protocol Revision: 2 Product Description: Device to route between BACnet/IP, ISO 8802-3 and MS/TP networks. BACnet Standardized Device Profile (Annex L): BACnet Operator Workstation (B-OWS) BACnet Building...

Data Sheet — BAS Portable Router Wiring Diagrams The BAS Portable Router features a USB 2.0 Full Speed Device Port that accepts the USB cable with Type B plug that is included in the box. It takes 5 VDC from a host computer, while typically drawing 400 mA of current. It can operate from a USB hub, if desired, and no driver installation is needed. The BAS Portable Router incorporates a 3-wire optically-isolated EIA-485 interface for the MS/TP connection, allowing better circuit protection and noise immunity. To connect to other 3-wire devices simply 2-wire MS/TP Bus Wiring 3-wire MS/TP Bus Wiring...

Data Sheet — BAS Portable Router Typical Installation MS/TP Network Connector Pin Assignments 3-pin (MS/TP) + RJ-11 (MS/TP) RJ-45 (MDI Ethernet) 1 TD+ SC 2 RT– 2 TD– 4 SC 3 RD+ 5 RT+ 6 RD– (All other pins are unused.) – (All other pins are unused.) Mechanical Drawing DS-BASRTPB0-BA1 Page 7

Data Sheet — BAS Portable Router Specifications Power Requirements USB power: 5 VDC ±10%, 400 mA, 2 W Operating Temperature 0°C to 60°C Storage Temperature –40°C to 85°C Relative Humidity 10–95%, non-condensing Protection IP30 Ethernet Communications IEEE 802.3 10/100 Mbps data rate 10BASE-T, 100BASE-TX physical layer 100 m (max) CAT5 cable length MS/TP Communications ANSI/ASHRAE 135 (ISO 16484-5) 9600, 19200, 38400, 76800 bps data rate EIA-485 physical layer 1200 m (max) cable length LEDs Power Green = power OK Ethernet Green = 100 Mbps Yellow = 10 Mbps Flash = activity MS/TP Flashing green...