- Catalogs
- Contelec AG
- PL130
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
PL130
PL130
- Nominal resistance options: 1, 5, 10 kOhm with a tolerance of ±15%.
- Independent linearity is ±2.5% of the measurement range.
- Electrical angle is 300°.
- Temperature coefficient of the voltage divider is 30 ppm/°C.
- Recommended maximum wiper current is 1 µA, with a malfunction maximum of 5 mA.
- Power rating is 0.25 W at 40°C.
- Minimum electrical life is 5 million cycles.
- Mechanical range is 316°.
- Maximum torque is 0.5 Ncm.
- Minimum mechanical life is 5 million cycles.
- Operating temperature range is -25°C to +85°C.
- Storage temperature range is -55°C to +105°C.
- Protection class is IP65.
- Insulating resistance is 10 GOhm at 500 VDC, 1 bar, 2 seconds.
- Dielectric strength is 750 V at VAC, 50Hz, 1 minute, 1 bar.
- Vibration resistance is 10 g (Amax = 0.75mm, f = 30 to 2000 Hz).
- Shock resistance is 50 g (half sine pulse, 7 ms).
- Position setting of truck rear-view mirrors.
- Front panel adjusting knob.
- Compact dimensions and design flexibility.
- Durability with 5 million cycles.
- Very good resolution, better than 0.1°.
- Custom shaft designs available.
- Electrical angles between 20° and 300°.
- Mechanical angles between 45° and 316°.
Catalog excerpts
Electrical Data Nominal resistance Resistance tolerance Independent linearity Electrical angle Temperature coefficient of the voltage divider Recommended wiper current Max. wiper current in case of malfunction Power rating P Min. life (electrical) Mechanical Data Mechanical range Torque Min. life (mechanical) Operating temperature Storage temperature Protection class Standards Insulating resistance (500 VDC, 1bar, 2s) Dielectric strenght (VAC, 50Hz, 1min, 1bar) Vibration (Amax = 0.75mm, f = 30 ... 2000 Hz) Shock (half sine pulse, 7 ms) PL130 Applications • Positionsetting of truck rearview mirror • Front panel adjusting knob Features • Compact dimensions • Design flexibilty • 5 Mio. cycles • Very good resolution, better 0,1° Options • Custom shafts design • Electrical angles between 20° and 300° • Mechanical angles between 45° and 316° Errors and omissions excepted. Subject to change without notice. / State: 05.05.20 Contelec AG Portstrasse 38 CH-2503 Biel/Bienne Phone +41 (0)32 3665600 Telefax +41 (0)32 3665604 [email protected] conTelec A company of the Siedle-Group
Open the catalog to page 1All Contelec AG catalogs and technical brochures
- CONTELEC rotary encoder
- Incremental encoder
- Incremental rotary encoder
- CONTELEC absolute rotary encoder
- Solid-shaft rotary encoder
- Industrial rotary encoder
- CONTELEC magnetic rotary encoder
- CONTELEC DC rotary encoder
- IP65 rotary encoder
- IP67 rotary encoder
- CONTELEC compact rotary encoder
- Aluminum rotary encoder
- Stainless steel rotary encoder
- Potentiometer
- CONTELEC single-turn rotary encoder
- Flange rotary encoder
- CONTELEC ultra-rugged rotary encoder
- Digital rotary encoder
- Rotary potentiometer
- 5VDC rotary encoder