USB DAQ Unit Digital Input 8ch / Relay Output 8ch | DIO-0808RN-USB
5Pages

N Series for USB Isolated Digital I/O Unit(8ch Relay Output, 8ch DI) * Specifications, color and design of the products are subject to change without notice. Features Diverse installations such as screw fastening, magnet, DIN rail are possible Installation on the floor / wall /ceiling is possible by screw fastening, magnet, rubber feet, etc. In addition, DIN rail mounting mechanism is equipped as standard with the product, making it easy to install the product within the panel or the device. Compact design not restricting installation location (188.0(W) x 78.0(D) x 30.5(H)) Compact design of 188.0(W) × 78.0(D) × 30.5(H) does not require special installation location Easy-to-wire terminal connector adopted Adoption of terminal connector (with screws) enables to achieve easy wiring. Relay outputs (Form C) with independent common This product has 8 channels of SPDT relay outputs (Form C) with independent common. Independent common terminal provided per channel, capable of supporting a different external power supply. High-capacity output rating is designed to be a maximum of 6A 240V (AC), 5A 28V (DC) per channel. Optocoupler isolated input (compatible with current sink output/current source output) This product has 8 channels of Optocoupler isolated inputs (compatible with current sink output/current source output) whose response speed is 200μsec, supporting driver voltages of 12 - 24 VDC for input. 8 channels share one common. Opto-coupler isolation and relay isolation As the USB I/F on PC is isolated from the input interfaces by opto-couplers and output interfaces by relays, this product has excellent noise performance. Compatible to USB1.1/USB2.0 Compatible to USB1.1/USB2.0 and capable to achieve high speed transfer at HighSpeed (480 Mbps). Windows compatible driver libraries are attached. Using the attached digital I/O driver API-DIO(WDM) makes it possible to create applications of Windows. In addition, a diagnostic program by which the operations of hardware can be checked is provided. This product is an USB2.0-compliant digital I/O unit that extends the input function of digital signal from the USB port of PC and output signals to SPDT relay contacts. This product is compatible with input digital signals at 12 24VDC which features 8 channels of Optocoupler isolated inputs (compatible with current sink output/current source output) and 8 channels of SPDT relay outputs with independent common. Compact design not restricting installation location (188.0(W) x 78.0(D) × 30.5(H)) makes it easy to install the product within the panel or device using DIN rail mounting jigs, or on the floor or wall. Windows driver library is supplied. Possible to be used as a data recording device for LabVIEW, with dedicated libraries. Specification Item Input Number of input signal channels Input format Input resistance Input ON current Input OFF current Response time Dielectric strength Dielectric strength *5 Output Number of output signal channels Output format Max. rating capacity Max. permitted voltage Max. Carry Current Contact resistance Relay (Initial state) Contact Operate time Spec. Release time Mechanical Life Expectancy Electrical Lifetime Specification 8 channels (1 common) Opto-isolated input (Compatible with current sink / current source output) (Negative logic *1) 4.7kΩ 2.0mA or more 0.16mA or less Within 200µsec *2 500Vrms 12 - 24VDC (±10%) 8 channels (independent common) SPDT Relay Output (Form C) 6A 240VAC, 5A 28VDC (load resister) 240V (Max.) *7, *8 5A (Max.) 100mΩ max. Within 10ms Within 5ms 10,000,000 operations min or more Switching times : 300 operations/min 50,000 operations min. Switching times : 30 operations/min G6RL-1 Relay Type USB section Bus specification USB Specification 2.0/1.1standard USB transfer rate 12Mbps (Full-speed), 480Mbps (High-speed) *3 Power supply Bus Power Common section Number of terminals used at 127 terminals (Max.) *4 the same time Current consumption (Max.) 5VDC 430mA Operating conditions *6 0 - 50ºC, 10 - 90%RH (No condensation) Allowable distance of signal Approx. 50m (depending on wiring environment) extension Physical dimensions (mm) 188.0(W)×78.0(D)×30.5(H) (No protrusions) Weight 300g (Not including the USB cable, attachment) Connector 10 pin (screw-terminal) plug header x4 Attached cable USB Cable 1.8m *1 Data “0” and “1” correspond to the High and Low levels, respectively. *2 The Optocoupler's response time comes. *3 This depends on the PC environment used (OS and USB host controller). *4 As a USB hub is also counted as one device, you cannot just connect 127 USB units. *5 External circuit power supply is required. *6 To suppress the heating, ensure that there are spaces for ventilation (about 5cm) around this product. *7 Please don’t exceed either max. permitted voltage or max. rating capacity of the use relay when using it by the voltage that exceeds 28VDC. Doing so can cause a malfunction. *8 The potential difference between channels must not exceed 240V in the maximum. Doing so can cause a malfunction. LabVIEW is supported by a plug-in of dedicated library VI-DAQ. Using the dedicated library VI-DAQ makes it possible to make a LabVIEW application

Support Software Windows version of digital I/O driver API-DIO(WDM) [Stored on the bundled CD-ROM driver library API-USBP(WDM)] It is the library software, and which supplies command of hardware produced by our company in the form of standard Win32 API function (DLL). Using programming languages supporting Win32API functions, such as Visual Basic and Visual C++ etc., you can develop high-speed application software with feature of hardware produced by our company. In addition, you can verify the operation of hardware using Diagnostic programs. < Operating environment > OS Windows 7, Server...

Ver.1.02 Removal procedure (1) Pull down the fixing hook of the unit to unlock it. Installation Using the Magnet Attaching the magnet supplied with the product makes it easy to mount or remove the product on or from a metal surface such as steel desk or partition. CAUTION Do not let the magnet go near objects that can be affected by magnetic fields, such as monitors and floppy disks. If the product is shifted while mounted on the steel surface, the surface paint may be scratched. When using the magnet, stack connection is not possible. (2) With the fixing hook unlocked, pull the lower part...