High-speed IEEE-488.2 GPIB communication board for PCI This product is a PCI bus compatible interface board with support for bus master operation and which complies with IEEE-488.1 and IEEE-488.2. The card can be used in a PC to control communications with devices that support the GPIB interface and perform GPIB bus line data analysis. You can use the supplied driver library to develop application software using any programming language that supports the Win32 API routines (such as Visual Basic or Visual C++), or using LabVIEW. * Specifications, color and design of the products are subject to change without notice. * The contents in this document are subject to change without notice. * Visit the CONTEC website to check the latest details in the document. * The information in the data sheets is as of August 2019. *1 This board requires power supply at +5 V from an expansion slot (it does not work on a machine with a +3.3 V power supply alone). Board Dimensions <GP-IB(PCI)F> <GP-IB(PCI)FL> GP-IB(PCI)F, GP-IB(PCI)FL

Data bus DIO1 Data bus DIO2 Data bus DIO3 Data bus DIO4 Management bus(End or Identify) EOI r (Data Valid) DAV Handshake (Not Ready for Data) NRFD bus (Not Data Accepted) NDAC (Interface Clear) IFC Management bus (Service Request) SRQ (Attention) ATN (Ground) GND DIO5 Data bus DIO6 Data bus DIO7 Data bus -DIO8 Data bus -REN(Remote Enable)Management bus -GND (Ground) -GND (Ground) -GND (Ground) -GND (Ground) -GND (Ground) GND (Ground) -Logic GND NOTE: This hardware does not support Windows 95, Windows 98 and Windows NT 4.0/3.51. Driver Library API-PAC(W32) [Bundled] API-PAC(W32) is the library...