Ver.1.01 High-Speed Analog Input Board for PCI AD12-16U(PCI)EV * Specifications, color and design of the products are subject to change without notice. This product is PCI-compliant interface boards that convert analog input signals to digital data (performing analog-to-digital conversion). This product carries high-capacity buffer memory for 16M data for analog input, allowing background sampling to be performed in a variety of trigger conditions. This product also has one analog output channel, four channels for TTL level digital input, and four channels for TTL level digital output. This product is the high-speed type that performs A-D conversion at a conversion speed of 1μsec/ch and a resolution of 12-bit. Using the bundled API function library package [API-PAC(W32)], you can create Windows application software for this board in your favorite programming language supporting Win32 API functions, such as Visual Basic or Visual C++. It can also collect data easily without a program when the data logger software [C-LOGGER] stored on the attached CD-ROM is used. With plug-ins for the dedicated libraries, the board also supports MATLAB and LabVIEW. This product is partly improved from the past analog E series; it is an upward-compatible product. Basically, this product can therefore be used in the same way as the analog E series. This product is different in specification from the E series. The difference point is shown in “Differences between past analog E and this product”. Features Resolution :12-bit, combination speed : 1μsec/ch This product is the high-speed type that performs A-D conversion at a conversion speed of 1μ sec/ch and a resolution of 12-bit. The product has analog input 16ch, analog output 1ch, digital input/output (TTL level: four each), and a counter (32-bit, TTL level 1ch). In addition, the analog input can be set to single-end input 16ch or differential input 8ch, while the counter is commonly used as the digital input/output. Equipped with high-capacity buffer memory for 16M data and a variety of sampling control functions FIFO or RING buffer memory for 16M data, allowing sampling to be performed as a background task independent of the processing power of the PC. Capable of starting and stopping sampling not only by software commands but depending on the strength of an analog signal (via conversion data comparison) or by detection of a TTL level signal (external trigger). Sixteen single-ended channels or eight differential channels (Analog input function) These boards allow either single-ended or differential input mode that is selected with on-board jumpers. The order of channels subject to signal conversion can be preset in the dedicated register. Using an optional unit, a board can increase the maximum number of input channels (up to 32 channels) and perform simultaneous sampling. Abundant optional units Providing a variety of options available for extending the functions, including buffer amplifier, simultaneous sampling, insulation & current/thermocouple input, low pass filter, and cables. Software-based calibration function Calibration of analog input/output can be all performed by software. Apart from the adjustment information prepared before shipment, additional adjustment information can be stored according to the use environment. Supported to the data logger software [C-LOGGER] Supporting the data logger software [C-LOGGER] that enables the graph display of recorded signal data, file saving, and dynamic transfer to the spreadsheet software program “Excel” Plug-ins for the dedicated libraries, the board also supports MATLAB and LabVIEW. We offer a dedicated library [ML-DAQ], which allows you to use this product on MATLAB by the MathWorks as well as another dedicated library [VI-DAQ], which allows you to use the product on LabVIEW. These dedicated libraries are available, free of charge (downloadable), on our web site. Mixed on-board channels for analog output and digital I/O One channel for analog output, four channels for TTL level digital input, and four channels for TTL level digital output mixed on the board. Compact PCI short-size board with a wealth of advanced functions AD12-16U(PCI)EV 1

Ver.1.01 Specification Support Software Specification Item Specification Analog input Isolated specification Type Number of input channels Input range Absolute max. input voltage Input impedance Resolution Non-Linearity error *1*2 Conversion speed Buffer memory Conversion start trigger Conversion stop trigger Unisolated Single-Ended Input or Differential Input (Jumper setup) 16ch (Single-Ended Input) 8ch (Differential Input) Bipolar ±10V, ±5V, ±2.5V or Unipolar 0 - +5V, 0 - +10V (Jumper setup) ±15V 1MΩ or more 12-bit ±3LSB 1μsec/ch (Max.) 16M data FIFO or 16M data RING (Software setup) Software/Input...

Ver.1.01 Cable & Connector Packing List Cable (Option) Flat Cable with 37-Pin D-SUB Connector at One End : PCA37P-1.5 (1.5m) Shield Cable with 37-Pin D-SUB Connector at One End : PCA37PS-0.5P (0.5m) Board [AD12-16U(PCI)EV] …1 First step guide … 1 CD-ROM *1 [API-PAC(W32)]…1 *1 The CD-ROM contains the driver software and User’s Guide. Block Diagram : PCA37PS-1.5P (1.5m) 16 single-ended / 8 differential Analog Inputs Shielded Cable with 37-pin D-SUB connectors at either ends : PCB37PS-0.5P (0.5m) Analog Outputs : PCB37PS-1.5P (1.5m) Simultaneous Hold Counter 4 Digital Inputs / 4 Digital Outputs...

Examples of Connecting Options Board for 16 channel increase When the channel increase board and the function increase board are combined and used, an external power Belay terminal stand Screw TWrninal * The accessory with tide mark can be mounted on a DIN rail by using Low pass filter accessory Isolated expansion accessory for analog input Low pass filter accessory Isolated expansion accessory for analog input Gain Operatioi Buffer Amplifier Relay terminal stand Relay terminal stand General purpose terminal < Single Endedn Input > Digital Ground Analog Ground Analog Ground Analog Ground Analog...