Ethernet Remote I/O unit Isolated Digital Input/Output | DIO-1616LN-FIT
5Pages

Ver.1.01 Ethernet Remote I/O F&eIT N Series Isolated Digital Input/Output Unit DIO-1616LN-FIT * Specifications, color and design of the products are subject to change without notice. This product is an isolated digital input and output unit of F&eIT remote I/O system that realizes monitoring and control of devices scattered remotely, through PCs connected to Ethernet. Since existing network infrastructure can be used, the system can be built easily by just connecting with LAN cables. It is possible to connect external devices, such as adjacent switches, lamps and LEDs, to perform input/output of digital signals. Compact design not restricting installation location (188.0(W) x 78.0(D) × 30.5(H)) makes it easy to install the product within the panel or device using DIN rail mounting jigs, or on the floor or wall. Windows driver library is supplied. It is possible to confirm the operations through the diagnosis monitor without any programming. This product has the 16ch of Optocoupler isolated inputs and 16ch of Optocoupler isolated open-collector outputs (input : 12 - 24VDC specification, output : 12 - 48VDC specification). Input section corresponds to both of current sink and current source outputs. The output rating is max. 24VDC, 150mA or 48VDC, 50mA per ch. Features Optocoupler isolated inputs (for use with current sink output / current source output), Optocoupler isolated open-collector outputs (current sink type) This product has the 16ch of Optocoupler isolated inputs (for use with current sink output / current source output) and 16ch of Optocoupler isolated open-collector outputs (current sink type). The output rating is max. 24VDC, 150mA or 48VDC, 50mA per ch. Common terminal provided per 8ch, capable of supporting a different external power supply. You can check the digital input or output by using the LED indicator. Optocoupler bus isolation As the Ethernet controller (PC) side is isolated from the input and output interfaces by Optocouplers, this product has excellent noise performance. This product has a digital filter to prevent wrong recognition of input signals from carrying noise or a chattering. This product has a digital filter to prevent wrong recognition of input signals from carrying noise or a chattering. All input terminals can be added a digital filter, and the setting can be performed by software. Fail safe function When communication failure occurs, such as LAN cable disconnection, it is possible to notify the external devices by outputting a specific user-defined signal pattern. Compact design not restricting installation location (188.0(W) x 78.0(D) x 30.5(H)) Compact design of 188.0(W) × 78.0(D) × 30.5(H) does not require special installation location. Compatible with a wide range of power supplies : 5 to 24VDC Compatible with a wide range of power supplies : 5 to 24VDC, and can be used in various environments. An FG terminal is also provided in the power connector. Furthermore, it is possible to screw fit the power connector on to the body to prevent detachment. Can be used as digital input/output of Ethernet base remote I/O As the control (monitoring and control) of digital input/output is performed via Ethernet, remote control can be easily performed. DIO-1616LN-FIT Diverse installations such as screw fastening, magnet, DIN rail are possible Installation on the floor / wall /ceiling is possible by screw fastening, magnet, rubber feet, etc. In addition, DIN rail mounting mechanism is equipped as standard with the product, making it easy to install the product within the panel or the device. Windows compatible driver libraries are attached. Using the attached driver library makes it possible to create applications of Window. As the driver library was designed taking into consideration compatibility with the API functions [API-PAC(W32)] of the measurement control and communication interface board, if you have experience in these applications, smooth programming is possible. In addition, a diagnostic program by which the operations of hardware can be checked is provided. In addition, using generic socket functions makes it possible to implement control under OS other than Windows, such as UNIX machine. Specification Specifications < 1 / 2> Item Input section Input format Input resistance Input ON current Input OFF current Number of input signal channels Response time External circuit power supply Output section Output format Ratings Output voltage Output current Number of output signal channels Response time External circuit power supply Common section Allowable distance of signal extension Applicable wire Applicable plug Specifications Optocoupler isolated input (compatible with current sink output and current source output) 4.7kΩ 2.0mA or more 0.16mA or less 16 channels (8 channels / common) Within 1msec 12 - 24 VDC (±15%) (2.5 mA / 12V, 5 mA / 24V per channel) Optocoupler isolated open collector output (current sink type) 12 - 48VDC (±15%) 150 mA (12 - 24V) (per channel) (Max.) 50 mA (36 - 48V) (per channel) (Max.) 16 channels (8 channels / common) Within 1msec 12 - 48VDC (±15%) Approx. 50m (depending on wiring environment) AWG28 - 16 AK1550 / 10-3.5-GREEN (mfd. by PTR) 1

Ver.1.01 Specifications < 2 / 2> Current consumption (Max.) FG pin Power input connector Specifications 10/100BASE-TX(IEEE802.3u) 5 - 24VDC±10% supply from 2-piece power input detachable type connector It is recommended that you use F&eIT series power unit or stabilized power product on the market. Maximum extension between power device and the product : 1.5m 5VDC 0.60A, 12VDC 0.26A, 24VDC 0.14AA Power supply connector equipped with a FG pin. 2-piece power input detachable type connector with an FG terminal supplied Uses connector : MC1,5/3-GF-3,5 (mfd by Phoenix Contact) The dedicated...

Ver.1.01 Connecting a Switch The unit can be connected to an external device using 10-pin connectors that is provided on the unit face. Connector : 4 INPUT 1 COM N.C. 7 6 5 4 3 INPUT 0 0 COM N.C. 7 6 5 4 3 2 1 Signal name Logical bit 0 1 2 3 4 5 6 7 IN00 IN01 IN02 IN03 IN04 IN05 IN06 IN07 0 1 2 3 4 5 6 7 0 N.C. N.C. - - - Pin No. INPUT0 COM - 0 1 2 3 4 5 6 7 INPUT1 COM IN10 IN11 IN12 IN13 IN14 IN15 IN16 IN17 Logical port 8 9 10 11 12 13 14 15 N.C. COM N.C. - COM - OUTPUT 1 2 1 0COMCOM7 6 5 4 3 1 2 Input plus common (Ex : COM of connector INPUT 0) Unit side Signal Layout on the Interface...