CONTEC USB DAQ and Control Products Selection Guide
8Pages

Recommended Mobile Measurement Tool for Notebook PC The Y-series The Most Suitable for USB-based Remote I/O System Same Functionality & Compatibility as Expansion boards for PC The X-series Connect a Favorite Equipment to the Latest Computer Micro Converter-series For notebook PC & mobile measurement systems, replacement of desktop PC systems and embedded remote I/O systems. Downsize and Improve Efficiency of your inspection system and research equipment. "The PC-HELPER USB-series" is the BEST USB peripheral device for electronic measurement, analysis, testing and communication system.

PC-based Data Acquisition (DAQ) & Control DAQ & Control Devices New Products Analog I/O | Multi-function DAQ 12-bit Analog Input, 2-ch 12-bit Analog Output, 1-ch 32-bit Counter, 16-ch Digital I/O 500kS/s 16-ch ・Compatible with a USB1.1/USB2.0. Bus Power ・Mounting on 35mm DIN rail. Attached screw fastening, and magnet/rubber feet. ・Adoption of screw terminal connector that enables to achieve easy wiring. ・12-bit Analog Input SE:16-ch(DI:8-ch) 2μsec/ch (AIO-121602LN-USB) ・12-bit Analog Input SE:8-ch(DI:8-ch) 5μsec/ch (AIO-120802LN-USB) ・2-ch 12-bit Analog Output, 1-ch 32-bit Counter, 16-ch...

PC-based Data Acquisition (DAQ) & Control DAQ & Control Devices Best for mobile measurement tools No cables necessary. Fasten screw wiring. The Y series Benefits of the Y-series Support Software Ultraportable Compact & Lightweight Design They are compatible with USB1.1 / USB2.0, and supplied power from USB (bus power), so they are perfect for using as mobile measurement/simple examination tool. It provides data graph drawing of bulk data without any need for annoying programming. Attached Software Attached USB cable (1.8m) with a cover Every product in this Y series has 1.8m USB cable that...

PC-based Data Acquisition (DAQ) & Control DAQ & Control Devices Operating similarly to PCI/PCI Express boards Multi-channels I/O with mass connector The X series Support Software Benefits of the X-series Same Functionality & Compatibility as Expansion board The X series is a USB1.1/2.0-compliant device, and matches the capabilities of PCI Express/PCI board for desktop PC. Products in the X series has high-compatibility with expansion boards for desktop PC. Such as driver library API but connector & pin assignment, I/O circuit and digital filter. Attached USB cable (1.8m) with a cover Every...

PC-based Data Acquisition (DAQ) & Control DAQ & Control Devices Best for embedded remote I/O systems Screw terminal connection without cables The N series Support Software Benefits of the N-series The Best Module for Embedded System! The N series is mountable on 35mm DIN rail by itself. They has fixable hook that makes reliable installation on a DIN rail. Also, there are 4 screw holes (fitting for φ3.5) on each edge of a module for ease of mounting. CONTEC is pursuing ease of embedded for equipment. They are powered from USB port (bus powered), so a distribution is unnecessary for the...

PC-based Data Acquisition (DAQ) & Control DAQ & Control Devices Conversion RS-232C/422 & GPIB Communications with USB Micro Converter series Benefits of Serial Comm series Support Software Connect RS-232C/422A/485 Serial Communication devices from USB port Serial Communications Windows-compliant COM Driver CONTEC's serial comm devices are compatible with USB 1.1/2.0. The Data comm is possible to connect a Windows/Linux-compliant PC that has USB port and comm devices that has RS-232C port such as measurement equipment and audio/video equipment. The maximum transfer speed is 921,600bps, and...

PC-based Data Acquisition (DAQ) & Control DAQ & Control Devices Multi-Function DAQ & Analog Input Product Code Sample Rate Analog Output * SE: Single end input 2-wires connection DI: Differential input 3 - 4-wires connection Digital Input / Output Product Code Digital Input Digital Output Counter Product Code Baud rate Standard Compatibility Transfer Rate GPIB (IEEE488.1/IEEE488.2) Product Code HOT

PC-based Data Acquisition (DAQ) & Control Other Buses & Embedded PC Data Acquisition (DAQ) & Control Providing USB modules is not the only CONTEC's solution. We are a worldwide pioneer that provide components for creating PC-based measurement control systems. We provide over 400 products, and you will surely be able to find anything you want. If the product you are looking for is not on our product list, please let us know. We will propose to you the best way from variety of perspectives. PCI/PCI Express Board Custom Computer CONTEC has a super line up for you ranging from high-end boards,...