CONPROSYS nano series for Remote I/O and Logic Controller
CONPROSYS nano series for Remote I/O and Logic Controller
The document outlines the technical specifications and configurations of the CONPROSYS nano Series, a remote I/O system tailored for IoT applications. It emphasizes the system's modular design, cost-effectiveness, and adaptability to diverse industrial settings.
The CONPROSYS nano Series operates within a temperature range of -20 to 60°C (-4 to 140°F) and features a compact design for efficient space utilization. It includes various I/O modules such as analog and digital inputs/outputs, relay outputs, and RS-485 communication. The system supports IEC 61131-3 compliant PLC programming through a CODESYS runtime system.
The system can be configured with different coupler units, each supporting multiple I/O modules. These units are DIN rail mountable and connectable via Ethernet for distributed control. The document details power consumption and installation methods for each unit.
The system supports Modbus TCP and RTU protocols, allowing integration with various host systems. It can operate as a Modbus slave device and supports autonomous control through PLC programming.
Performance tests measured input and output response times across different configurations, showing variability based on the number of I/O modules and coupler units used.
The CONPROSYS nano Series facilitates digital transformation in industrial systems by offering a flexible, modular approach to remote I/O management. It reduces equipment costs and simplifies communication programs by consolidating nodes and supporting diverse I/O configurations.
The system includes a software library for command execution using OS standard APIs, available for free download. It supports daisy chain connections for network configurations, eliminating the need for additional network hubs.
The CPSN-CNT-3201I model features a 1-channel input for various phases and a general input, with opto-coupler isolated inputs and outputs. It consumes 0.4W and uses a screw terminal block connector.
The CPSN-COM-1PD model supports RS-422A/485 asynchronous serial transmission in full or half duplex modes, with bus isolation. It consumes 1.7W and uses a screw terminal block connector.
The CPSN-RRY-4PCA model provides 4-channel relay contact output with a power consumption of 1.2W, using a screw terminal block connector.
The CPSN-AI-1208LI and CPSN-AI-2408LI models offer single-end or differential input options with 12-bit and 24-bit resolutions, respectively. They support various input ranges and use a screw terminal block connector.
The CPS-PWD-30AW24-01 and CPS-PWD-90AW24-01 models provide 24VDC output with maximum currents of 1.3A and 3.8A, respectively, suitable for DIN rail mounting.
The document describes NPN and PNP transistor output types, which are opto-coupler isolated and driven by a built-in 12VDC power supply.
The CPSN-AO-1602LC model offers voltage/current output with 2 isolated channels, providing a 16-bit resolution and consuming 2.1W of power.
Catalog excerpts
Measures the Input and Output Response Performance ■ Measurement Environment CONTEC Technology for a better life Testing environment (CPU,Memory) Driver version Controls 1 I/O modulewith 1 coup ler unit. Ethernet Based Remote I/O System for loT CONPROSYS™ Controls 4 same type of I/O modules with 1 coupler unit. nano Series Windows PC Controls 12 same type of I/O modules with 3 coupler units. (4 modules per coupler unit) The measurement results are measured values in the environment prepared by us. That are not the guaranteed specification data. Embedded Switching HUB Product Name •Supports 100BASE-TX •Operating temperature from -20 to 60°C (-4 to 140°F) •Power supply redundant, power supply reverse wiring countermeasure circuit built-in •Mountable on the 35mm DIN rail Dimensions (mm/inch) An external power supply is required. Contec offers an AC adapter product (model: POA201-10-2) (sold separately). Please check Contec website for details. Contec Global Network U.S.A. CONTEC AMERICAS INC. 3991 Sarno Road, Melbourne, FL 32934 U.S.A. Tel. : +1-321-728-0172 THE NETHERLANDS CONTEC CO., LTD. AMSTERDAM BRANCH Hogehilweg 18 1101 CD Amsterdam THE NETHERLANDS Tel. : +31-20-238-0960 TAIWAN CONTEC CO., LTD. 9FL, No. 738, Zhongzheng Road, Zhonghe District, Xinbei 23511 TAIWAN Tel. : +886-2-8227-8669 CONTEC CO., LTD. Korea Liaison Office 19, Cheongmyeong-ro 21beon-gil, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16705 KOREA CONTEC (SHANGHAI) CO., LTD Room 1002, Qilai Building, No. 889, Yishan Road, Xuhui District, Shanghai 200233 CHINA Tel. : +86-21-5401-2288 INDIA CONTEC CO., LTD. India Liaison Office Unit No. DPT 134, First Floor, DLF Prime Tower, Okhla Phase 1, New Delhi - 110025, INDIA SINGAPORE CONTEC PTE. LTD. Blk 4010, Ang Mo Kio Ave. 10 #07-01 Techplace I, 569626 SINGAPORE Tel. : +65-6459-1667 https://www.contec.com/ Headquarters: CONTEC CO., LTD. (Japan) 3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan Tel:+81-6-6477-5219
Open the catalog to page 1
Remote I/O devices for digitizing interspersed local devices. CONPROSYS nano is easy to use and excellent cost performance, which accelerates digital transformation for industrial systems. Series Two types of coupler units available for different usages and system configurations For PC-based (Windows / Linux) / PLC-based centralized control Remote I/O coupler units 35mm DIN rail mountable. Tool-free to insert / remove an I/O modules Slave type CPSN-MCB271 Control from host PC with Windows / Linux API Windows / Linux driver available. You can build a remote I/O system with an industrial computer...
Open the catalog to page 2
Coupler Units As a remote I/O of a communication device that supports Modbus master function, various I/O modules can be used. Coupler Units Equipped with a CODESYS runtime system conforming to IEC61131-3, enabling use of various I/O modulesbe used. Type of remote I/O coupler units Type of remote I/O coupler unit Model * To use Modbus RTU (RS-422A / 485 (multi-drop possible)), additional CPSN-COM-1PD module is required. * To use Modbus RTU (RS-422A / 485 (multi-drop possible)), additional CPSN-COM-1PD module is required *2 The operating temperature is from -20°C to 55°C (-4°F to 131°F) when the...
Open the catalog to page 3
CONPROSYS™ nano Series Digital Input and Output Modules Suitable Power Supply Unit is available at Contec + CPSN-PCB271 -SI-041 CPSN-COM-1 PD x 4 CPS-PWD-30AW24-01 < The power consumption is the sum of the power consumption of the coupler unit and the I/O modules. Please prepare a Contec power supply unit or a commercially available product that can supply the required power. * If the power supply unit also supplies power to other devices, select a power supply that matches the total power consumption amount. Power consumption: 2.4W + 1.7W x 4 = 9.2W Rated power : 30W Relay Module Digital Output...
Open the catalog to page 4All CONTEC catalogs and technical brochures
BX-S33002 Pages
FA Computer GPC-700 series2 Pages
Industrial Switching HUB2 Pages
IoT Products Line up2 Pages
General Product Catalog Ver.3.052 Pages
CONPROSYS IO-Link Master2 Pages
CONPROSYS PAC series7 Pages
