T/LL130 series fuel level sensor

Product catalog summary

Overview: The T/LL130 series fuel level sensor is designed for use in water, coolant, or fuel/oil tanks. It provides a variable resistive or voltage output suitable for industry-standard fuel gauges or PLC connections. The sensor has no moving parts and can be mounted at any angle, provided it covers the entire tank depth.

Specifications:

Dimensions: Probe length ranges from 80mm to 2000mm.
Electrical: Operates on a supply voltage of 7-35Vdc with a current of approximately 15mA at 12Vdc. The operating frequency is 8.3kHz, with a factory-set resistance range output signal. Load impedance is factory set between 0 and 5V. It includes a warning output at 1/8 tank as default and has a linearity of 1%. Connections are made via a 4-way Delphi Packard connector, with an accuracy of ±2.0% of immersion depth at 20°C.
Construction: The housing is made of 30% glass-filled Nylon 6, with an internal sensor of PTFE-covered stainless steel. The sensor tube is stainless steel 316, and seals are made of fluorosilicone rubber. Internal insulators are also 30% glass-filled Nylon 6.
Fluid Compatibility: Compatible with fluids that are compatible with 316 stainless steel, Nylon 6, and fluorosilicone rubber.
Environmental Ratings: Operating temperature ranges from -40ºC to +85ºC, with storage temperatures from -55ºC to +100ºC. It can withstand shock up to 50g for 6.3ms and vibration of 1.5mm at 10-57Hz (600 to 3420 RPM). The maximum tank pressure is 2.0 bar (29 psi).

Manufacturer Information: Contec GmbH Industrieausrüstungen, located at Aegidienberger Str. 69, D-53604 Bad Honnef, Germany. Contact via phone at +49-(0) 22 24.98 93-0 or email at [email protected].

Catalog excerpts

T/LL130 series fuel level sensor The Model T/LL130 series is designed for use in water, coolant or fuel/ oil tanks and provides a variable resistive or voltage output suitable for driving industry standard fuel gauges or connecting into plcs. The device has no moving parts and can be mounted at any angle as long as it covers the whole depth of the tank. Specification Dimensions: Probe length: Electrical: Supply voltage: Operating frequency: Load impedance: Warning output: Connections: 7-35Vdc 8.3kHz 100 - 10,000W On...1/8 tank as default 4 way Delphi Packard connector Construction: Housing: Sensor tube: Internal insulators: 30% glass filled Nylon 6 Stainless steel 316 30% glass filled Nylon 6 Supply current: Output signal: Linearity: Accuracy: 15mA@12Vdc approx Factory set resistance range Factory set between 0 and 5V 1% ±2.0% of immersion depth @ 20°C Internal sensor: Seals: PTFE covered stainless steel Fluorosilicone rubber Sealing: Shock: Max tank pressure: Fluid Types: Fluids compatible with 316 St/St, Nylon 6 & Fluorosilicone rubber Environmental Ratings: Temperature - operating: -40ºC to +85ºC - storage: -55ºC to +100ºC Vibration: 1.5mm 10-57Hz (600 to 3420 RPM) Contec GmbH Industrieausrüstungen Wege zur sauberen Lösung Irrtümer und Druckfehler vorbehalten. www.contec-umwelt.de info@contec-umw

Open the catalog to page 1

T/LL130 series fuel level sensor

T/LL130 series fuel level sensor

Catalog excerpts

All Contec GmbH Industrieausrüstungen catalogs and technical brochures