Gauge serie 6400 6400 Series Standard material of construction -Head: Stainless Steel -Gear housing: Stainless Steel -Centershaft, support tube, float rod: Stainless Steel -Gears, cross stud, bearings: Stainless Steel -Drive magnet: Teflon Coated Neodymium -Float: Stainless Steel -Gasket: Teflon, Stainless Steel spiral wound -Counterwheight: Stainless Steel Mounting position Gauges of serie 6400 can be manufactured for any mounting position. Vertical : Horizontal: Horizontal: Angle: Stainless Steel Magnetic Liquid-Level Gauges The 6400 series gauges are widely used to indicate the liquid levels of Chemicals and fluid. The 6400 serie is used for tank diameter/height up to 2000mm and tank pressure up to 30 bars. The float is counterbalanced for low specific gravity fluids. The gauge can be equipped with a direct reading dial, Twinsite or switch. top mounted 1 end mounted 2 side mounted 3 angle mounted 4 (angle is specified from horizontal, positive above horizontal, negative below horizontal) ROCHESTER GAUGES INTERNATIONAL S.A. Z.I. WAVRE NORD - AVENUE LAVOISIER, 6 - 1300 WAVRE - BELGIUM Phone: +32(0)10241010 Fax: +32(0)10228139 Web site: http://www.rochester-gauges.be E-mail: [email protected]

Senior: (4) screws 5/16”-24*7/8” or M8/25 mm on 63.5 mm bolt circle diameter. MODEL NUMBER DIAL TYPE TOP HORIZ. OR ANGLE TOP TOP HORIZ. OR ANGLE TOP HORIZ. OR ANGLE Twinsite Twinsite Side reading 50 mm dial 50 mm dial 100 mm dial 100 mm dial Ordering information A. For cylindrical horizontal tanks,specify: -gauge model number -liquid to be gauged with its density, tank design pressure -working pressure and temperature -mounting position -riser dimension (distance between gauge gasket seat and tank wall) -outside and inside diameter -shape of dished end for end mounting gauge -tank drawing is...