1. Catalogs
  2. Contec GmbH Industrieausrüstungen
  3. Datasheet Wedge Wire Filter CSF-FD

Datasheet Wedge Wire Filter CSF-FD

Datasheet Wedge Wire Filter CSF-FD

Datasheet Wedge Wire Filter CSF-FD

Product catalog summary
Overview:
The document describes the Self-cleaning Wedge Wire Filter models CSF-FD and AS110-FD, designed for robust applications. These filters are constructed with a single-piece housing and are suitable for a wide range of fluids.

Specifications:
  • Filter Housing: Single piece, stainless steel construction.
  • Flow Rate Efficiency: 25 m³/h for CSF700-FD and 35 m³/h for CSF1000-FD.
  • Flange Inlet/Outlet: DN65/DN80.
  • Operating Pressure: 10 bar standard, 16 bar optional.
  • Operating Temperature: 80°C standard, up to 180°C optional.
  • Motor: Screw-Drive Gear Motor, 400 V, 50 Hz, IP65, EX-proof available.

Cleaning Process:
The filter uses a gear motor to rotate the filter cartridge, while a scrapper blade removes solids from the surface. Solids are collected at the bottom of the housing and can be purged manually or automatically.

Maintenance:
  • Fast and easy cleaning with no tools required for scrapper blade removal.
  • Four eye screws allow for easy lid and scrapper blade unit removal.
  • Optional polished inside surface for easier cleaning.

Main Features:
  • Self-cleaning without production interruption.
  • Suitable for nearly all fluids with no cartridge disposal.
  • High differential pressure stability.
  • Solidly built single-piece filter housing.

Applications:
  • Paint and Varnish, Dispersions, Print Colours, Undercoating, Solvents, Mineral Oil Industry, Emulsion, Electrophoresis Varnish, Chocolate Mass, Softening Agents, Polyurethane, Cooling Liquids, Yeast, Adhesive, Tar Products.

Technical Data:
  • Material: Stainless Steel 1.4571 for housing, 1.4435 for cartridge, and 1.4310 for scrapper blade.
  • Gasket: Viton O-Ring / PTFE.
  • Micron Size: 25–3000 μm.

Order Code:
Example: CSF 700 - FD, manufactured according to pressure vessel directive 97/23/EG Cat.1, Art. A.
See more

Catalog excerpts

Datasheet Wedge Wire Filter CSF-FD-1

Wege zur sauberen Losung Wedge Wire Filter AS110-FD Print Colours Electrophoresis varnish Chocolate mass Softening agents Cooling liquids Wedge Wire Filter CSF-FD The Wedge wire filter is solidly built and may be used for the toughhest applications. The filter consists of the following parts: • Filter Housing (single piece) • Cleaning scrapper blade unit with wiper • Gear Motor with lid • 3-leged foot stand (has to be fixed to floor) The liquid flows from the outside of the filter element and the solids are collected on the outside of the wedge wire screen.The cleaning The gear motor turns the cylinder shaped filter cartridge and the scrapper blade removes the solids from the surface. The solids remain in the lower parts of the filter housing. When the valve is open will the solids be pressed outside by the pressure in the The collected solid may be purged: • Manually: by opening and closing of ball valve • Automatic: by time controlled vent • Automatic: with electronic controller (with differential pressure Maintenance and cleaning of filter is fast and easyly done. Only four eye screws have to be removed to take out the lid (with motor) and scrapper blade unit. The inside of the filter unit can be cleaned Inside surface of Filter can be polished as an option. Main Features: • Fast and easy cleaning of clean- and dirt room • No tools needed for removal of scrapper blade • Minimum product loss during output of solids • Easy Filter cartridge dismount • Self-cleaning without interruption of production process • Suitable for nearly all fluids • High differential pressure stability • Solidy built single piece filter housing Scrapper blade unit with wiper Contec GmbH Industrieausriistungen Heideweg 24 Wege zur sauberen Losung D-53604 Bad Honnef

 Open the catalog to page 1
Datasheet Wedge Wire Filter CSF-FD-2

Wege zur sauberen Losung *Foot leg has tobe fixed to floor Order Code: Manufactured acc. pressure vessel directive 97/23/EG Cat.l, Art. A Technical Data Filter Cartridge: Scrapper Blade: Micron Size: Operating pressure: Operating temperature: Screw-Drive Gear Motor Special voltage on request Wege zur sauberen Losung D-53604 Bad Honnef D-53594 Bad Honnef Fax :+49-(0) 22 24 98 93-20 [email protected]

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.