Special Caravan and trailer lifts

1 / 2 PagesView full catalog

Special Caravan and trailer lifts

Product catalog summary

Specifications:

Four special rolled section columns for structural support.
Carriage guided by six rollers with lifting and safety nuts made of bronze.
Equipped with an oil dispenser for lubrication support.
Includes a broken nut raise lock-down feature and acoustic foot protection.
Operated via contactor control with a separated main switch.
Swivel arm locking mechanism with additional manual release.
Driven by four ribbed-belt motors with computerized synchronization.
Lifting pads with hard rubber profile, adjustable via threaded spindle with a 25 mm stroke.
Protection class IP 54, GS-approved, DIN EN 1493, CE-approved.

Models and Capacities:

Model 2 x 2.30 EL: Capacity 3,000 kg, Motor 4 x 3.0 kW, Lifting/Lowering time 35 s, Lifting height 2,005 mm.
Model 2 x 2.45 EL: Capacity 4,500 kg, Motor 4 x 3.0 kW, Lifting/Lowering time 35 s, Lifting height 1,970 mm.
Model 2 x 2.65 EL: Capacity 6,500 kg, Motor 4 x 5.0 kW, Lifting/Lowering time 45 s, Lifting height 1,965 mm.

Dimensions:

Drive-through width: 2,900 mm for all models.
Post clearance crosswise: 3,400 mm for all models.
Set-up width/height varies by model, with the largest being 4,660 mm width and 2,900 mm height.
Arm extension range varies from 830 mm to 1,675 mm depending on the model.
Swivel-in height ranges from 85 mm to 115 mm.

Additional Information:

Special adapters available on request.
Printing errors, mistakes, and technical changes are reserved. Illustrations may deviate from the actual products.

Catalog excerpts

Spezial Wohnwagen Hebebühnen Special Caravan and trailer lifts » Mit Sonderaufnahmen auf Anfrage » With special adapters on request 4 Tragsäulen aus Spezialwalzprofil 6-fach rollengelagerter Hubwagen mit Trag- / Sicherheits mutter aus Bronze Öler zur unterstützenden Schmierung Wiederauffahrsicherung, akustischer Warngeber (Fußschutz) Schützsteuerung Separater abschließbarer Hauptschalter Schwenkarmarretierung mit zusätzl. manueller Entriegelung Antrieb über 4 Rippenriemenmotoren mit computergesteuerter Synchronisation Aufnahmeteller mit Hartgummiprofil verstellbar über Gewindespindel mit 25 mm Hub Schutzart IP 54, GS-Prüfplakette, CE-Zertifikat • 4 special rolled section columns • Carriage guided by 6 rollers with lifting / safety nuts made of bronze material • Oil dispenser for supporting lubrication • Broken nut raise lock-down feature, acoustic foot protection • Operation via contactor control • Separated main switch • Swivel arm locking mechanism incl. add. manual release • Drive via 4 ribbed-belt motors with computerised synchronisation • Lifting pads with hard rubber profile, adjustable via threaded spindle (25 mm stroke) • Protection class IP 54, GS-appro

Open the catalog to page 1

Made in Germany Druckfehler, Irrtumer und technische Anderungen vorbehalten. Abbildungen konnen von den Artikeln abweichen. Printing errors, mistakes and technical changes reserved. Illustrations can deviate from the products.

Open the catalog to page 2

All Consul Werkstattausrüstung GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list