*mydirectindustry

UPG-500B

Product catalog summary

Overview: This document provides technical specifications for a machine tool produced by Conprofe Machine Tool Co., Ltd., a subsidiary of Conprofe Technology Group Co., Ltd. It includes details on the machine's capabilities, components, and additional features.

Specifications:

Tool Magazine: Umbrella type with a capacity of 12 tools. Maximum tool diameter is 90 mm, length is 90 mm, and weight is 3 kg.
Power Supply: Three-phase AC, 380V/50Hz with a power capacity of 12 kVA.
Air Requirements: Air pressure between 0.5-0.7 MPa and total air consumption greater than 100 L/min.
Machine Dimensions and Weight: 1805 × 1890 × 2350 mm with a total weight of 3500 kg including accessories.
CNC System: SIEMENS 828D-280 HNC-918D.

Worktable and Travel:

Dimensions: 500x400 mm with a maximum load of 200 kg.
T-Slot: 4 slots, each 12 mm wide and 100 mm apart.
X/Y/Z-Axis Travel: 500x400x230 mm with spindle nose to table distance of 165-395 mm.

Spindle:

Diameter: Φ120 mm.
Speed: Maximum short-duration speed of 30,000 rpm and long-duration speed of 24,000 rpm.
Power and Torque: Rated power of 7.5 kW and torque of 3.4 Nm.
Taper: HSK-E40 with optional ultrasonic capability.

Feed Rate and Accuracy:

X/Y/Z-Axis Rapid Speed: 15 m/min.
X/Y/Z-Axis Max. Feed Rate: 10 m/min.
Motor Power: 0.8 kW for each axis.
Positioning Accuracy: 0.003 mm.
Repeatability: 0.002 mm.

Additional Features:

Automatic centralized lubrication system, spindle chiller, high precision linear encoders, handwheel, blow gun, high precision 3D probe, dust collector, 4/5th axis rotary table, automatic door, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, contact tool setter, laser tool setter, and extended tool magazine ETM-14/12.

Contact Information: Esther HU, email: [email protected], phone: +86-138 2607 9999, address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Disclaimer: The information provided is not binding and the actual product and mutual agreement shall prevail.

Catalog excerpts

Ultrasonic Precision Graphite Machining Center ^ Technical Data X/Y/Z-Axis Travel Spindle Nose to Table Dimensions Max. Load T-Slot (No. x Width x Distance) Diameter Max. Speed (Short-Duration) Max. Speed (Long-Duration) Power (Rated) Torque (Rated) Spindle Taper Ultrasonic Tool Magazine^ Tool Holding Capacity Max. Tool Diameter (Full) Max. Tool Length Max. Tool Weight Type X/Y/Z-Axis Rapid Speed X/Y/Z-Axis Max. Feed Rate X/Y/Z-Axis Motor Power Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) X/Y/Z-Axis Positioning Accuracy mm Accuracy Grade - Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe Dust Collector 4/5th Axis Rotary Table Automatic Door Automatic Centralized Lubrication System Spindle Chiller High Precision Linear Encoders Handwheel Blow Gun Contact Tool Setter Laser Tool Setter Extended Tool Magazine ETM-14 /12 Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-138 2607 9999 E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development...

Open the catalog to page 2

UPG-500B

UPG-500B

Catalog excerpts

All Conprofe catalogs and technical brochures

Archived catalogs