*mydirectindustry

ULM-800C

Product catalog summary

Overview: This document provides technical specifications for the ULM-800C machine tool by Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. It includes details on tool capacity, power requirements, machine dimensions, and additional features.

Tool Magazine: The machine supports both non-ultrasonic and ultrasonic tools, with a capacity of 40 and 20 tools respectively. The maximum tool diameter is 76 mm, with a maximum length of 260 mm and weight of 5 kg.

Power and Air Requirements: The machine operates on a three-phase AC power supply of 380V/50Hz with a power capacity of 33 kVA. It requires an air pressure of 0.5-0.7 MPa and consumes more than 100 L/min of air.

Machine Specifications: The total weight of the machine, including accessories, is 9000 kg, with dimensions of 2990×2935×2875 mm.

Controller and Axis Specifications: The machine is equipped with a SIEMENS 828D-280 CNC Controller. The X/Y/Z-axis rapid speed is 24 m/min, with a maximum feed rate of 10 m/min and motor power of 3.1 kW. Positioning accuracy is 0.005 mm, and repeatability is 0.003 mm.

Worktable and Travel: The worktable dimensions are 850x850 mm, with a maximum load capacity of 1000 kg. The T-slot configuration is 8-18×100 mm. The X/Y/Z-axis travel is 800×800×350 mm, with a spindle nose to table distance of 145-495 mm.

Spindle Specifications: The spindle diameter is Φ150 mm, with a maximum short-duration speed of 18000 rpm and long-duration speed of 14400 rpm. The motor power is rated at 15 kW (Y) and 20 kW (△), with a torque of 39.6 Nm (Y) and 24.8 Nm (△). The spindle taper is HSK-A63.

Additional Features: The machine includes a coolant system, automatic centralized lubrication system, spindle chiller, handwheel, blow gun, high precision 3D probe, high precision linear encoders, oil-mist collector, electrical cabinet heat exchanger, LED work light, three-color alarm light, door safety interlock, 4/5th axis rotary table, automatic door, and contact tool setter.

Contact Information: For further inquiries, contact Esther Hu at [email protected] or +86-138 2607 9999. The company is located at No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Disclaimer: The information provided is not binding, and the actual product and mutual agreement shall prevail.

Catalog excerpts

Ultrasonic Precision Engraving & Milling Center ULM-BOOC Technical Data Travel CNC Controller Spindle Nose to Table mm 145-495 Motor Power (Rated) kW Motor Torque (Rate) Nm Spindle Taper - Minimum Quantity Lubrication (MQL) -Ultrasonic + MQL - Worktable W' Dimensions Max. Load T-Slot (No.xWidthxDistance) Feed Rate Tool Holding Capacity Max. Tool Diameter (Full) Max. Tool Length Max. Tool Weight Type Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) No. of Tools Non-Ultrasonic: 40 Ultrasonic: 20 mm 76 - Chain Type X/Y/Z-Axis Rapid Speed X/Y/Z-Max. Feed Rate X/Y/Z-Axis Motor Power Accuracy X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Accuracy Grade Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Coolant System Automatic Centralized Lubrication System Spindle Chiller Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe High Precision Linear Encoders Oil-Mist Collector 4/5th Axis Rotary Table Automatic Door Contact Tool Setter Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact: Esther HU +86-138 2607 9999 E-mail: [email protected] Address: No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list