*mydirectindustry

ULM-600C

Product catalog summary

Overview: This document provides technical specifications for the ULM-600C machine tool, a product of Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. The document outlines the machine's capabilities, components, and optional features.

Specifications:

Tool Magazine: The machine supports both non-ultrasonic and ultrasonic tool magazines, each with a capacity of 9 tools.
Tool Holding Capacity: Maximum tool diameter is 110 mm, maximum tool length is 70 mm, and maximum tool weight is 3 kg.
Power Supply: Operates on a three-phase AC, 380V/50Hz with a power capacity of 27 kVA.
Air Requirements: Requires air pressure between 0.5-0.7 MPa and total air consumption of over 100 L/min.
Machine Dimensions and Weight: The machine measures 1,850 × 2,100 × 2,395 mm and weighs 5,000 kg including accessories.

Controller: Equipped with HNC-918D SIEMENS 828D-280 CNC Controller.

Travel and Worktable:

X/Y/Z-Axis Travel: 600×500×300 mm.
Spindle Nose to Table: 150-450 mm.
Worktable Dimensions: 620x560 mm with a maximum load of 300 kg.

Feed Rate and Accuracy:

X/Y/Z-Axis Rapid Speed: 15/15/15 m/min.
X/Y/Z-Max. Feed Rate: 10/10/10 m/min.
Positioning Accuracy: 0.005 mm.
Repeatability: 0.003 mm.

Spindle:

Diameter: Φ150 mm.
Max. Speed: 18,000 rpm (short-duration), 14,400 rpm (long-duration).
Motor Power: Rated at 15 kW (Y) and 20 kW (△).
Motor Torque: Rated at 39.6 Nm (Y) and 24.8 Nm (△).
Spindle Taper: HSK-A63.

Optional Features: Includes ultrasonic capabilities, minimum quantity lubrication (MQL), supercritical CO₂ spindle, and various accessories such as a coolant system, spindle chiller, and 5-axis simultaneous machining system.

Contact Information: For further inquiries, contact Esther Hu at [email protected] or +86-138 2607 9999.

Note: The information provided is not binding and subject to mutual agreement.

Catalog excerpts

Ultrasonic Precision Engraving & Milling Center— — ///// ULM-eaac Technical Data Standard Spindle Nose to Table mm 150-450 Motor Power (Rated) kW Motor Torque (Rate) Nm Spindle Taper - Minimum Quantity Lubrication (MQL) -Ultrasonic + MQL - Worktable^' Dimensions Max. Load T-Slot (No.xWidthxDistance) Feed Rate Tool Holding Capacity Max. Tool Diameter (Full) Max. Tool Length Max. Tool Weight Type No. of Tools Non-Ultrasonic: 9 Ultrasonic: 9 X/Y/Z-Axis Rapid Speed X/Y/Z-Max. Feed Rate X/Y/Z-Axis Motor Power MjsceU^eousP' Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (l x w x h) X/Y/Z-Axis Positioning Accuracy X/Y/Z-Axis Repeatability Accuracy Grade Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd

Open the catalog to page 1

Optional Configurations Coolant System Automatic Centralized Lubrication System Spindle Chiller Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe Oil-Mist Collector 4/5th Axis Rotary Table Automatic Door Contact Tool Setter Ultrasonic Amplitude Measuring Device 5-Axis Simultaneous Machining System (with rtcp Function) Non-Ultrasonic Extended Tool Magazine ETM-9 (C) Ultrasonic Extended Tool Magazine ETM-9 (C) Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list