*mydirectindustry

ULM-500B

Product catalog summary

Overview: This document provides technical specifications for a machine tool manufactured by Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. The machine is equipped with both ultrasonic and non-ultrasonic capabilities and features a variety of advanced components and systems.

Specifications:

Tool Magazine: The machine has a tool holding capacity of 12 tools for both ultrasonic and non-ultrasonic operations, with an umbrella type configuration.
Power Supply: Operates on a three-phase AC, 380V/50Hz power supply with a capacity of 12 kVA.
Air System: Requires air pressure between 0.5-0.7 MPa and consumes more than 100 L/min.
Machine Dimensions and Weight: The machine measures 1650 × 1880 × 2405 mm and weighs 3500 kg including accessories.

Controller: The machine uses the HNC-918D SIEMENS 828D-280 CNC Controller.

Travel and Worktable:

X/Y/Z-Axis Travel: 500 × 400 × 300 mm.
Spindle Nose to Table: 175-475 mm.
Max Load: 200 kg.
T-Slot: 4 slots with dimensions 12 × 100 mm.

Feed Rate and Accuracy:

X/Y/Z-Axis Rapid Speed: 15 m/min.
X/Y/Z-Max. Feed Rate: 10 m/min.
Positioning Accuracy: 0.005 mm.
Repeatability: 0.003 mm.

Spindle:

Diameter: Φ120 mm.
Max Speed (Short-Duration): 30000 rpm.
Max Speed (Long-Duration): 24000 rpm.
Motor Power: 7.5 kW.
Motor Torque: 3.4 Nm.
Spindle Taper: HSK-E40.

Additional Features:

Includes systems such as a coolant system, automatic centralized lubrication, spindle chiller, and more.
Optional features include ultrasonic amplitude measuring device, 5-axis simultaneous machining system, and extended tool magazines.

Contact Information: For further inquiries, contact Esther Hu at [email protected] or +86-138 2607 9999.

Note: The information provided is not binding and the actual product specifications may vary based on mutual agreement.

Catalog excerpts

Ultrasonic PrecisionEngraving & Milling Center— — / //// ULMSOOB Technical Data Standard Optional HNC-918D SIEMENS 828D-280 Spindle Nose to Table mm 175-475 Diameter Max. Speed (Short-Duration) Max. Speed (Long-Duration) Motor Power (Rated) Motor Torque (Rate) Spindle Taper Ultrasonic Minimum Quantity Lubrication (MQL) Ultrasonic + MQL Supercritical CO2 Spindle Tool Holding Capacity Max. Tool Diameter (Full) Max. Tool Length Max. Tool Weight Type MsceManeouS^ Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) Dimensions Max. Load T-Slot (No.xWidthxDistance) No. of Tools Non-Ultrasonic: 12 Ultrasonic: 12 mm 90 - Umbrella Type Feed Rate X/Y/Z-Axis Rapid Speed X/Y/Z-Max. Feed Rate X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy mm Accuracy Grade - Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Coolant System Automatic Centralized Lubrication System Spindle Chiller Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe Ultrasonic Amplitude Measuring Device Oil-Mist Collector 5-Axis Simultaneous Machining System (with rtcp Function) 4/5th Axis Rotary Table Non-Ultrasonic Extended Tool Magazine ETM-12 (B) Automatic Door Ultrasonic Extended Tool Magazine ETM-12(B) Contact Tool Setter Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement shall prevail Contact:...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list