*mydirectindustry

ULM-500A

Product catalog summary

Overview: This document provides technical specifications for the ULM-500A machine tool, a product of Conprofe Machine Tool Co., Ltd., a wholly-owned subsidiary of Conprofe Technology Group Co., Ltd. It includes details on tool capacity, power requirements, dimensions, and additional features.

Tool Magazine: The machine supports both non-ultrasonic and ultrasonic tool magazines, each with a capacity of 14 tools. The umbrella type tool holding system accommodates a maximum tool diameter and length of 90 mm, with a maximum tool weight of 3 kg.

Power and Air Requirements: The machine operates on a three-phase AC power supply of 380V/50Hz with a power capacity of 10.5 kVA. It requires an air pressure of 0.5-0.7 MPa and consumes more than 100 L/min of air.

Machine Dimensions and Weight: The total weight of the machine, including accessories, is 3500 kg. Its dimensions are 1650 mm x 1880 mm x 2405 mm (L x W x H).

Controller and Spindle: The machine is equipped with an HNC-918D SIEMENS 828D-280 CNC Controller. The spindle has a maximum short-duration speed of 40,000 rpm and a long-duration speed of 32,000 rpm, with a motor power of 6 kW and a torque of 2.7 Nm. The spindle taper is HSK-E32.

Travel and Worktable: The X/Y/Z-axis travel is 500 mm x 400 mm x 300 mm, with a spindle nose to table distance ranging from 175 mm to 475 mm. The worktable can support a maximum load of 200 kg and features T-slots (4 slots, each 12 mm wide and 100 mm apart).

Feed Rate and Accuracy: The X/Y/Z-axis rapid speed is 15 m/min, with a maximum feed rate of 10 m/min. The positioning accuracy is 0.005 mm, and repeatability is 0.003 mm.

Additional Features: The machine includes a coolant system, automatic centralized lubrication, spindle chiller, handwheel, blow gun, high precision 3D probe, oil-mist collector, and options for a 4/5th axis rotary table, automatic door, contact tool setter, and more. It also supports ultrasonic amplitude measuring and 5-axis simultaneous machining with RTCP function.

Contact Information: For further inquiries, contact Esther Hu at [email protected] or +86-138 2607 9999. The company is located at No.6 2nd Nanyun Road, Science City, Hi-tech Development Zone, Guangzhou, 510663, P.R.C.

Disclaimer: The information provided is not binding, and the actual product and mutual agreement shall prevail.

Catalog excerpts

Ultrasonic PrecisionEngraving & Milling Center— — / //// ut-M-saa/x Technical Data Standard Optional HNC-918D SIEMENS 828D-280 Travel Spindle Nose to Table mm 175-475 Diameter Max. Speed (Short-Duration) Max. Speed (Long-Duration) Motor Power (Rated) Motor Torque (Rate) Spindle Taper Ultrasonic Minimum Quantity Lubrication (MQL) Ultrasonic + MQL Supercritical CO2 Spindle Tool Holding Capacity Max. Tool Diameter (Full) Max. Tool Length Max. Tool Weight Type MsceManeouS^ Power Supply Voltage Power Capacity Air Pressure Total Air Consumption Total Weight (incl. Accessories) Machine Size (L x w x H) Dimensions Max. Load T-Slot (No.xWidthxDistance) No. of Tools Non-Ultrasonic: 14 Ultrasonic: 14 mm 90 - Umbrella Type Feed Rate X/Y/Z-Axis Rapid Speed X/Y/Z-Max. Feed Rate X/Y/Z-Axis Motor Power X/Y/Z-Axis Positioning Accuracy mm Accuracy Grade - Conprofe Machine Tool Co., Ltd. // Wholly-Owned Subsidiary of Conprofe Technology Group Co., Ltd.

Open the catalog to page 1

Optional Configurations Coolant System Automatic Centralized Lubrication System Spindle Chiller Handwheel Blow Gun Electrical Cabinet Heat Exchanger LED Work Light Three-Color Alarm Light Door Safety Interlock High Precision 3D Probe Ultrasonic Amplitude Measuring Device Oil-Mist Collector 5-Axis Simultaneous Machining System (with rtcp Function) 4/5th Axis Rotary Table Non-Ultrasonic Extended Tool Magazine ETM-14 (A) Automatic Door Ultrasonic Extended Tool Magazine ETM-14 (A) Contact Tool Setter Floor Plans (Unit: mm) The information given is not binding. The actual product and mutual agreement...

Open the catalog to page 2

All Conprofe catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list